SKEJAO 3662 3 Light Indoor Hanging Kitchen Island White Ceiling Pendant Lights Instruction Manual
- June 17, 2024
- SKEJAO
Table of Contents
SKEJAO 3662 3 Light Indoor Hanging Kitchen Island White Ceiling Pendant
Lights
Product Information
Specifications
- SKU : # 3662/3773D3/3518XD3 (Bulb not included)
- Support Rod
- Lip
- Wiring Terminal Metal Circle
- Ground Wire
Product Usage Instructions
Assembly Instructions:
- Secure Support Rod(K) onto Lip(M), then secure Hexnut(H) into Threaded Collar(I) with Allen Wrench(G).
- Unsecure Screw(H) from Threaded Collar(I) with Allen Wrench(G).
- Across Power Cord(J) into Threaded Collar(I) and adjust length as needed, then secure Screw(H) with Allen Wrench(G), attach Plastic Clip(L) into Power Cord(J).
- Open the Janitors from Wiring Terminal(O).
- Insert the white/black wire into the hole of Wiring Terminal(O), then close the Janitors.
- Attach Metal Circle(P) on Shade(Q).
- Place Shade(Q) on Socket(N) and secure with Socket Ring(R).
FAQ
- Q: What should I do if I exceed the recommended wattage for the product?
- A: It is important not to exceed the recommended wattage for the product to avoid any safety hazards. Using higher-wattage bulbs can lead to overheating and potential damage to the fixture. Please refer to the product specifications for the recommended wattage and use appropriate bulbs.
- Q: How do I contact customer support for further assistance?
- A: If you have any concerns or questions about our products, please feel free to contact us directly via email atnikki@doraimilight.com. We are committed to providing the best service and support to our customers.
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when the fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E26 TYPE A CFL 10W, LED 6W bu lb types and waages. Do not exceed the recommended wages
Parts included
Hardware enclosed
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience! Any questions please free to
contact us :
Email : nikki@doraimilight.com
Step 1: Canopy Nuts(F) and Mounting Plate(D) from the pipe.
step 2 : Secure Support Rod(K) onto Lip(M), then secure Hexnut(H) into
Threaded Collar(I) with Allen Wrench(G).
Step 3 :
- Unsecure Screw(H) from Threaded Collar(I) with Allen Wrench(G).
- Across Power Cord(J) into Threaded Collar(I) and adjust the length as needed, then secure Scrwe(H) with Allen Wrench(G), attach Plastic Cilp(L) into Power Cord(J).
Step 4:
- Open the Janitors from Wiring Terminal(O).
- Insert the white/black wire into the hole of the Wiring Terminal(O) then close the janitor
Step5:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Mounting screws (C) with a screwdriver.
Or the suhe chitut. compete fre black the orite wire fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire with the Wire Connector (A).
Step 6 : Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire with the Wire Connector(A).
Step7:
Place the canopy (E) against the mounting surface and fasten the Canopy Nuts(F) to the Mounting Plate (D)
Step8:
- Attach Metal Cirecle(P) on Shade(Q).|
- Place Shade(Q) on Socket(N) and secure with Socket Ring(R).
- Install bulbs(not included) into the Socket(N).
