GETSHOWERSET 3 Way Thermostatic Shower Valce Instruction Manual
- June 17, 2024
- GETSHOWERSET
Table of Contents
GETSHOWERSET 3 Way Thermostatic Shower Valce
Please do not hesitate to contact us with your questions.concerns and/or problems.we’re here to help.
Customer Support : [email protected]
ACCESSORIES & DIMENSIONS
INSTALLATION STEPS
PRECAUTIONS FOR INSTALLATION
- Water pressure: 0.05MPa~0.5MPa
- Water supply line must be “hot water on the left, cold water on the right”
- Before installation, water must be released to flush the pipe sediment to prevent sediment blockage affecting normal use.
- After pipe connections are complete, a leak proof test must be conducted to check that all connections are properly installed.
- Slot on the way according to the size of the valve body. The recommended length is 240mm, width is 110mm and depth is 70-85mm.
- Drill 4 fixed holes in the wall according to the product size, Hammer the expanded screw in the 4 drilled holes, Position the valve body on the 4 screws,use a phillips screwdriver to tighten the 4 self-tapping screws,fix the valve body on the wall.
- Connect all the pipes to check leakage, and confirm no leak occurs when tum on the water.
- Cover leak occurs when tum on water.
- Install the handwheel in the direction shown in the picture above and lock it with hexagon screws.
PRECAUTIONS FOR INSTALLATION
- Align the marks on the temperature valve stem.
- Sleeve the plastic ring onto the valve stem with the “C” shape opening facing the right.
OPERATING INSTRUCTION
Press the pointer to cross the temperature limit.
CLEANING ADVICE
- Clean regularly to prevent water stains.
- First spray the cleaner onto a soft cloth, and then gently wipe with the soft cloth.
- After cleaning, the surface of the product must be rinsed with sufficient water to remove any remaining detergent.
- Only use cleaners clearly marked for this product.
- Do not use alkaline bleach containing hydrochloric acid, acetic acid and chlorine, which will cause surface damage.
- Strictly abide by the amount of detergent and action time, never allow detergent action time greater than the specified value.
- Abrasive cleaning tools and equipment are not allowed.
AFTER SERVICE SUPPORT
- Backnets support 5 years warranty. Free replacement of any parts. If you have any questions, please feel free to contact us.
- Email address:[email protected]
Read User Manual Online (PDF format)
Loading......