MOSHAY Fits 16 Bicycle Training Wheels Instruction Manual
- June 16, 2024
- MOSHAY
Table of Contents
MOSHAY Fits 16 Bicycle Training Wheels
Needed Tools
ASSEMBLY INSTRUCTIONS
- ATTACH THE WHEEL TO THE ADJUSTABLE AUXILIARY BRACKET WITH SIAIN SOCKET WRENCH TIGHTEN LOCKING NUT SECURELY TO SHOULDER BOLT.
- REMOVE REAR AXLE NUT & LOCKING WASHER (IF EQUIPPED ON BIKE, NOT SHOWN) FROM REAR BIKE FRAME. DETACH ONE SIDE AT A TIME.
- CONNECT THE MAIN AUXILIARY BRACKET TO THE BIKE FRAME BY PLACING IT ON THE REAR BIKE AXLE E OR USING THE REAR BIKE AXLE EXTENDERS (SEE FIGURE 8) REATTACH LOCKING WASHER (IF PROVIDED) AND REAR AXLE NUT WITH 15MM SOCKET WRENCH. ONCE BRACKET IS ATTACHED, TIGHTEN REAR AXLE NUT SECURELY.
- ADJUST WHEEL SO THAT IT SITS 1/2 FROM GROUND. DO THIS BY ATTACHING THE ADJUSTABLE AUXILIARY ERACKET TO THE MAIN AUXILIARY BRACKET. ONCE HEIGHT IS SET. SCREW EN THE ADJUSTABLE SCREWS AND TIGHTEN THE LOCKING NUTS WITH 14MM SOCKET WRENCH.
- REPEAT PROCESS FOR OTHER SIDE.
NOTE: YOU’LL WANT TO USE THE WRENCH TO HOLD ON TO THE LOCKING, NUTS AS YOU TIOHTEN THE SCREWS & BOLT WITH THE SOCKET WRENCH.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>