PALBY S B0C33XGP7R 2 Seaters 24V Ride on UTV with Remote Control User Manual

PALBY S B0C33XGP7R 2 Seaters 24V Ride on UTV with Remote Control

Product Information

Specifications

• Battery: 12V10AH*2
• Main material: PP
• Suitable age: 37-95 Months
• Weight limit for the car : 60kg
• Product size (With canopy): 126104128cm
• Product size (Without canopy): 12610477.5cm
• Carton size: 1128352CM
• Speed: 3-8 KM/Hour
• Runtime: 1-2 hours after charging for 8-12 hours, based on ride on conditions
• Charger: Input AC 110-220V Output DC 24V-1000mA
• Fuse: [Fuse information not provided]

Product Usage Instructions

Assembly Instruction

1. Ensure the product is assembled by an adult.
2. Refer to the provided manual for step-by-step assembly instructions.

Security Warning

• The installation and charging of the vehicle should be under adult supervision at all times.
• This product is limited to children from 37 to 95 months with a weight limit of 60kg.
• This product is ideal for driving on a hard flat surface.
• It is strictly prohibited to use this product in streets, roads, pot holes, and slopes.
• Avoid driving in sand, grass, or uneven ground.
• Children should be given full instructions on the operation of the car to avoid accidents or damage.
• While children are driving, parents should supervise at all times to avoid accidents.
• Avoid driving in rains or flooded pathways to prevent damage to the motor and electrical equipment.
• Regularly inspect the battery charger to ensure its proper functioning.

Usage Direction

• Ensure children have taken safety measures before using the toy.
• Use the toy under adult guidance.
• Parents should ensure that children are using the toy with caution to avoid falls or collisions causing injury to the user or a third party.

Remote Control Instruction
[Remote control instruction information not provided]

Charging Way

1. Connect the charger to a power source with an input of AC 110-220V.
2. Connect the charger to the vehicle’s charging port with an output of DC 24V-1000mA.
3. Allow the vehicle to charge for 8-12 hours.

Maintenance and Service
[Maintenance and service information not provided]

Troubleshooting
[Troubleshooting information not provided]

FAQ

1. Q: Where is the manufacturer located?
   A: The manufacturer is located at PINGHU BABY CARRIER INDUSTRY CITY, ZHEJIANG, CHINA.

2. Q: Who is the US importer?
   A: The US importer is Cascade Toys and Games LLC located at 14550 Interurban Avenue South, STE A100 Tukwila, WA 98168 US.

3. Q: What is the email address for support?
   A: The email address for support is support@palbys.net .

4. Q: Where is the product made?
   A: The product is made in China.

USER MANUAL Thank you for purchasing our product. Please read this manual carefully before using this product, install and use this product according to this manual, and pay attention to safety precautions

WARNING

• Assembly by an adult.
• This toy is unsuitable for children under 8 years due to its maximum speed.
• Protective equipment should be worn. Not to be used in traffic.
• A reminder that the toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.

PARTS LIST

WARNING:

• Products should be assembled by an adult. Protective equipment should be worn.
• Not to be used in traffic. Not suitable for children under 3 years.
• Choking hazard- small parts.
• In unassembled state, contains potentially hazardous small parts.
• Please keep out of the reach of small children.
• Pay attention to the potential hazards of using the toy in areas other than private grounds.

Disclaimer:
The pictures in this instruction are for assembly reference only. Please refer to the actual product.

Warning:

• This product is not the vehicle for transportation, it should be used under adult guidance.
• Parents should ensure that children have taken the safety measures before use.
• The toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third party.

PRODUCT SPECIFICATIONS

12610477.5cm (Without canopy)
Carton size| 1128352CM
Speed| 3-8 KM/Hour
Runtime| 1-2 hours after charging for 8-12 hours, based on ride on conditions
Charger| Input AC 110-220V Output DC 24V-1000mA
Fuse| Auto-reset fuse

Assembly instruction

• Car assembling should be done by the adults.
• Take care of small parts. To avoid choking hazard, keep children away while assembling.
• Children under 36 months are prohibited to use.
• Please count all the parts carefully before assembling and dispose the plastic bag properly.
• Children are prohibited from playing.

1. Battery connection
   Remove two screws on engine cover, open it and connect two red plugs from two wires.

2. Front axle assembly
   Remove two nuts from the front axle, align the front axle to round holes on square tube, then fix the nuts.

3. Footrest assembly
   Each Footrest has two parts, upper housing part and lower housing part, clamp two parts with the car body and fix with screws.

4. Front wheel assembly
   Front motors are different with rear motors. Front motors use green and yellow wires, rear motors use blue and yellow wires. Find out two front motors, the motor can be distinguished as the left or right according to the L / R sticker. Use the provided plastic wrench to remove the lock nut and washers from front axle, insert the motors into front axle, connect the motor plugs coming from the motor and car body, insert wheels and washers into the axle, tighten the lock nut. While applying pressure lock wheel cover into grooves on the wheel.

5. Shock absorber assembly
   Use provided wrench tool to remove the screw and lock nut from the shock absorber, align shock absorber with iron parts on the car body, then insert the screw and secure with lock nut.

6. Driving connecting part assembly
   Attach the driving connecting part with the rear wheel and secure with three screws.

7. Rear wheel assembly

8. Use the provided plastic wrench to remove the lock nut and washers from rear axle, insert the axle into car body, make sure the axle length that extend out on both sides are same.

9. Insert the motors into rear axle, connect the motor plugs coming from the motor and car body, insert wheels and washers into rear axle, tighten the lock nut. While applying pressure lock wheel cover into grooves on the wheel.

10. Steering wheel assembly
    Connect steering wheel wire to the wires coming out of the steering column and match connectors. Align the steering wheel with steering axle, match the holes on steering wheel and steering axle, fix them with a screw and a nut.
    

11. Seat assembly

12. Align the seat backrest with the corresponding position on car body, insert the hooks into the grooves on car body.

13. Align the seat with the corresponding position car body, fix it with two 4*16mm big flat head screws.

FUSE

• This car has a auto-reset fuse, if the car stops suddenly during driving, it is mainly caused by instantaneous current exceeds ,which makes the fuse to trip.
• Then just stop operating for about 8 seconds, and this fuse can be reset. Then turn on the power switch again.
• In order to avoid the fuse tripping and cutting off power supply, please pay attention to the following matters.
• This product can’t be overloaded, the maximum load is 60kg.
• Don’t drag anything behind the product.
• Don’t let the water or other liquid into the batteries and other electrical components.
• Don’t change the circuit system and structure of the product.

SECURITY WARNING

1. The installation and charging of vehicle should be under adult supervision at all times.
2. This product is limited to the children from 37 to 95 months, 60 kg weight limit.
3. This product is ideal for driving on a hard flat surface.
4. It is strictly prohibited in the streets or the road, pot holes, and slopes.
5. Avoid driving in the sand or grass or uneven ground.
6. Children should be given full instructions on operation of the car. Improper operation can cause damage or accidents.
7. While children are driving, it is parents’ duty to supervise at all time to avoid accidents.
8. Avoid driving in rains or flooded pathways. By doing so it can damage the motor, circuit and other electrical equipments.
9. Battery charger should be regularly inspected by parents to insure that the wires, plugs, crusts and other components are not damaged. Please stop using if any damage is found, until it is completely restored.
10. In order to ensure product life and safety, avoid damage to the charger, battery or electric circuit, the car must use the default configuration of a dedicated charger and power supply.
11. Rechargeable batteries should be removed from the toy before charging.
12. When no use of product, please cut off the product power, and keep all the switch to “stop” or “off” position.
13. The charger provided is not a toy. It is to be kept away from children.
14. Strictly prohibit using the non-manufacturer provided parts.
15. This product is made of PP material mainly, and the safe using time is two years.

USAGE DIRECTION

Before using it, make sure that all the following works are done.

• Step described in accordance with the instructions to com plate the installation of the car, the battery plug-in has been connected, the power supply has been switched on.
• Make sure that all the positions which need the screws are fixed tightly.
• Parents or guardian should ensure that children have taken the safety measures before using.
• To reduce the risk during using, pay attention the followings: When driving the car ,child should sit on the car seat.
• Adult or parents should take more care and guidance when child driving and can’t leave away.
• Pay attention to the driving environment and driving on the hard flat surface, not the unsafe environment.

For example:

1. The trenches, the riverside, slope or uneven ground;
2. Road or other places for driving and walking;
3. The obstruction which is easily hitting and causing injury;
4. Other unsafe zones.

To avoid accident, please use only in daytime or bright place, avoid using under low visibility.

Operating(function reference diagram)

Remote control instruction

2.4G Remoter Control Instructions
For the first time need to code, this product has a memory function, replacement battery next time, you do not need to match the code Once again.

1. Long press “M” button more than three seconds, until the first LED lights flashing.
2. Open body power, first a long bright LED turns on the success of the code.
3. Remote control 10 seconds without operating automatic standby, pressany key to wake up.
4. Key Description: “S” Speed, “P” Stop. Press the “S” key to set the speed, a light is low, two lights for medium-speed, three lights for high-speed,the car back with only medium-speed. Press the “P” key to keep the brakes, the indicator full flash, press the brake button again to lift the brake.

CHARGING WAY

• For Safety purpose ,the charging must be done by adults.
• The first time you use it, please remove the engine cover, connect two red plugs , use it only after charging 8-12 hours.
• The car has two charging ways. Charge from dashboard or removable battery box.
• One charging port is locate on dashboard, another charging port is locate on removable battery box. Please follow the instructions to charge the battery.
• If the car has slowed down, it needs to be charged by 8-12 hours, maximum 20 hours.

1. First insert the plug of the charger into the charging port. (The car can not be operated.)
2. Then insert the charger to the power socket.

WARNING

1. The toy is to be assembled by an adult. In unassembled state, it contains potentially hazardous sharp points & small parts, so please keep out of baby’s reach.
2. CHOCING HAZARD – Small parts.
3. Not for children under 3 yrs.
4. Always wear shoes.
5. RISK OF FIRE. Do not bypass. Replace only with circuit protection device.
6. Protective equipment should be worn. Not to be used in traffic.
7. This toy has no brake.

Attention :

• Can only use the charger and battery according to manufacturers regulations.
• Do not mix old and new or different types of batteries.
• The battery terminal should not be short circuit.
• Do not open the battery or charger.
• Do not reverse the battery.
• Before charging, please check whether the charger, battery and plug are ok, if you find any broken parts, you must stop using it immediately. And do not use it until it is fully repaired.
• The battery will be little warm when being charged, it is normal. If not, it may be caused from the short circuit of charger or circuit board.
• Must use the pressing plate to fix the battery.
• Run out of battery must be handled by adults, remove the battery which has run out from toys to recycle properly and shall not be arbitrarily discard.
• If the product is going to be stored unused long time , it must be fully charged, and charge it every 3 months ,so as to make sure the battery life.
• Charger and Battery are not toys. Keep them away from children.

MAINTENANCE AND SERVICE

1. Before use, parents should check whether all parts like batteries, charger, wires, plug, outer body and other parts are in good condition, check whether the screws are loose and whether there are potential safety hazards. Any damaged parts founded should be repaired before using.
2. After using the product for a period of time, use a small amount of lubricating oil to the moving parts to prevent wear and tear of rust.
3. Keep the car away from fire and direct sunlight. Place it stably, not upside down. The car shall be stored indoors or outdoors under cover.
4. The car should be kept away from hot items, such as stoves or heaters, or the plastic parts will melt. When charging, the car should be kept away from inflammable materials to prevent it from catching fire.
5. Charge in time after use. Charging should be done by adults. If the product is going to be unused for a long time, it must be fully charged. Charge it every month so as to extend the battery lifespan.
6. A soft cloth must be used to clean the car. Do not use chemical solvents to clean the plastic parts. Do not use soap or water to clean the car. Driving in rainy or snowy weather, water can damage the motor, battery and circuit system.
7. When stopping or storing the car, please cut off the power and make sure all switches are in the ‘STOP’ or ‘OFF’ position.
8. Do not use fuses different from the specifications of this product.
9. Do not change the product structure and circuit system. Maintenance and repair work must be done under the guidance of the professional or technical personnel in place.
10. Do not use the product for other purposes. Put the battery in the right polarity.
11. Battery negative short circuit is prohibited. Non-rechargeable batteries cannot be charged.
12. Rechargeable batteries can only be charged under the supervision of the adult.
13. Do not mix old and new batteries or different types of batteries.
14. The battery running out of power should be removed from the car properly and not allowed to be played by children.
15. Disconnect the batteries completely when not in use and do not allow children to play with them.

TROUBLESHOOTING

If the fuse is not functioning properly
If the battery is not connected, check the red and black wires.
If the charger is plugged in, car will not power on. Unplug charger.
If the hand accelerator is not functioning properly
If the wheels stuck and cannot move
Car moves slowly| If the battery is not fully charged. Need to be charged in time
If there is an issue with the wheels
If rider weight exceeds specifications
Battery does not charge| If the charger is malfunctioning
If the battery lost its capacity
If the charger and battery connection are charged

• Manufacturer: PINGHU SHUANGXI BABY CARRIER MANUFACTURE CO.,LTD.
• Manufacture Address: PINGHU BABY CARRIER INDUSTRY CITY, ZHEJIANG, CHINA
• US Importer: Cascade Toys and Games LLC
• Importer Address: 14550 Interurban Avenue South, STE A100 Tukwila, WA 98168 US
• E-MAIL:support@palbys.net

Made in China

Documents / Resources

| PALBY S B0C33XGP7R 2 Seaters 24V Ride on UTV with Remote Control [pdf] User Manual
B0C33XGP7R 2 Seaters 24V Ride on UTV with Remote Control, B0C33XGP7R, 2 Seaters 24V Ride on UTV with Remote Control, 24V Ride on UTV with Remote Control, UTV with Remote Control, Remote Control
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>