PURE-SEL Default Button Assignment User Guide
- June 16, 2024
- PURE-SEL
Table of Contents
PURE-SEL Default Button Assignment
Product Information
Specifications
- PURE SEL PixArt PAW3318 8K DPI optical sensor
- 200 IPS (5.1m/s) maximum tracking speed
- 30g maximum acceleration
- Default DPI steps : 400, 800 (default), 1200, 1600, 3200
- 1000Hz polling rate
- Lift-off distance : 1mm, 2mm customizable
- Mechanical Switch, 20 million click life cycle
- Weight : 49 grams
Product Usage Instructions
DPI Indication
Once the mouse is plugged in, pressing the DPI button will change the DPI
and show a corresponding color on the indicator for 2 seconds. The color
indicates the DPI level:
- 1st stage : Red (default DPI value : 400)
- 2nd stage : Green (default DPI value : 800)
- 3rd stage : Cyan (default DPI value : 1200)
- 4th stage : Blue (default DPI value : 1600)
- 5th stage : Pink (default DPI value : 3200)
The number of active DPI stages on your mouse can be changed in the driver software, along with the DPI value for each stage.
Default Button Assignment (no driver installed)
Button Number | Assigned Function |
---|---|
1 | Left click |
2 | Right click |
3 | Middle mouse button |
4 | Scroll up |
5 | Scroll down |
6 | Browser forward |
7 | Browser backward |
8 | DPI cycle |
Instructions
English
- Remove the blue protective plastic from the mouse feet.
- Plug the USB connector into any free USB port on your PC or laptop.
- Navigate to www.roccat.com/downloads and download the latest driver.
- Complete the installation to get access to all software features and setup.
German (Deutsch)
- Verbinde den USB-Stecker mit einem beliebigen freien USB Anschluss an deinem PC oder Laptop.
- Besuche www.roccat.com/downloads zum Herunterladen des neuesten Treibers.
French (Français)
Visitez www.roccat.com/downloads pour
télécharger le dernier pilote.
Japanese (日本語)
www.roccat.com/downloads
にアクセスして最新のドライバをダウンロードします。
Korean (한국어)
- USB 커넥터를 PC나 노트북의 빈 USB 포트에 연결하세요.
- www.roccat.com/downloads로 이동하여 최신 드라이버를 다운로드하세요.
Simplified Chinese (简体中文)
www.roccat.com/downloads 下载最新驱动程序。
Traditional Chinese (繁體中文)
www.roccat.com/downloads 下載最新驅動程式。
Thai (ไทย)
เข้าไปที่ www.roccat.com/downloads
เพื่อดาวน์โหลดไดรเวอร์ล่าสุด
Vietnamese (Tiếng Việt)
Truy cập www.roccat.com/downloads đểtải
về driver mới nhất.
Driverless Setup
- To enter config mode: hold down buttons 1, 2, 3, and 8 (default left click, right click, middle mouse, and DPI) for 3 seconds. The LED will show a sequence of white, red, green, then blue.
- To exit config mode: press buttons 1, 2, 3, and 8 at the same time once. The LED will show a sequence of blue, green, red, then white.
- Buttons 6 & 7 (browser forward & browser backward): Change polling rate. The LED will blink twice in the color of the selected polling rate.
- Button 3 (middle mouse button) : Swap between 1mm and 2mm liftoff distance. The LED will blink twice in the color of the selected lift-off distance.
- While holding button 1 (left mouse button), mouse wheel up/down : Change debounce value. The LED will blink twice in the color of the selected debounce value.
- While holding button 1 (left mouse button), buttons 6 & 7 (browser forward & browser backward): Change LED brightness (steps of 10%). The LED will immediately change.
FAQ
Q: How can I get technical support?
A: If you need assistance or have any technical questions, you can contact
our support team by sending an e-mail to
support@roccat.com or visit our website at
www.roccat.com/support.
QUICK START GUIDE
DEFAULT BUTTON ASSIGNMENT (no driver installed)
STANDARD
- 1 = Left click
- 2 = Right click
- 3 = Middle mouse button
- 4 = Scroll up
- 5 = Scroll down
- 6 = Browser forward
- 7 = Browser backward
- 8 = DPI cycle
INSTRUCTIONS
- Remove the blue protective plastic from the mouse feet.
- Plug the USB connector into any free USB port on your PC or laptop.
- Navigate to www.roccat.com/downloads and download the latest driver.
- Complete the installation to get access to all software features and setup.
PACKAGE CONTAINS
- ROCCAT® Pure SEL
- Quick-Start guide
TECH SPECS PURE SEL
- PixArt PAW3318 8K DPI optical sensor
- 200 IPS (5.1m/s) maximum tracking speed
- 30g maximum acceleration
- Default DPI steps : 400, 800 (default), 1200, 1600, 3200 1000Hz polling rate
- Lift-off distance : 1mm, 2mm customizable
- Mechanical Switch, 20 million click life cycle
- Weight : 49 grams
SYSTEM REQUIREMENTS
- Windows® 7 and above (software support).
- USB 2.0 port or higher.
- Internet connection (for driver installation).
Should you need assistance …
Our support team is ready to help you with any technical questions. Just send
an e-mail to support@roccat.com or visit our
website at:
WWW.ROCCAT.COM/SUPPORT
DPI INDICATION
Once the mouse is plugged in, pressing the DPI button will change the DPI and
show a corresponding color on the indicator for 2 seconds. The color is shown
as below
1st stage | Red (default DPI value : 400) |
---|---|
2nd stage | Green (default DPI value : 800) |
3rd stage | Cyan (default DPI value : 1200) |
4th stage | Blue (default DPI value : 1600) |
5th stage | Pink (default DPI value : 3200) |
The number of active DPI stages on your mouse can be changed in the driver software, along with the DPI value for each stage.
DRIVERLESS SETUP
To enter config mode : hold down buttons 1, 2, 3 and 8 (default left
click, right click, middle mouse, and DPI) for 3 seconds. The LED will show a
sequence of white, red, green, then blue.
To exit config mode : press buttons 1, 2, 3 and 8 at the same time once.
The LED will show a sequence of blue, green, red then white.
Buttons 6 & 7 (browser forward & browser backward)
Change polling rate. The LED will blink twice in the color of the selected polling rate
- 125Hz – Blue
- 250Hz – Green
- 500Hz – Yellow
- 1000Hz – White (default)
Button 3 (middle mouse button) : Swap between 1mm and 2mm lift-off distance. The LED will blink twice in the color of the selected lift-off distance
- 1mm – Red (default)
- 2mm – Purple
While holding button 1 (left mouse button), mouse wheel up/down : Change debounce value. The LED will blink twice in the color of the selected lift-off distance
- 2ms – Orange
- 5ms – Purple (default)
- 10ms – Cyan
While holding button 1 (left mouse button), buttons 6 & 7 (browser forward
& browser backward)
Change LED brightness (steps of 10%). The LED will immediately change.
While holding button 2 (right mouse button), mouse wheel up/down
Change LED Color (16 preset colors). The LED will immediately change. (This
will not affect Wave mode).
While holding button 2 (right mouse button), buttons 6 & 7 (browser forward
& browser backward)
Change LED mode (choose from Static, Wave, Heartbeat, Breathing, and
Blinking). The LED will immediately change.
Join the community
Become a ROCCAT member and register your product at
www.roccat.com/support/register-your-product
Service & support
Easy access to customer support
Authenticity check
Make sure you own an original
Exclusive deals
Opt-in for special offers and downloads
Please use your product’s serial number (located on the bottom label).
FCC CAUTION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation
GENERAL SAFETY GUIDELINES AND INTENDED USE
- Do not open or modify the product.
- Not approved changes or modifications may void the operation authority and/or warranty.
- In case of trouble or doubt, contact us immediately.
- Keep the product away from fire/water/humidity/temperature extremes.
- Only use as intended with a compliant PC and connector part.
- Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
- Don‘t look into the light beam on bottom of the mouse.
Hereby, Voyetra Turtle Beach Corp. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU.
The full Declaration of Conformity can be requested via following
- Company : Voyetra Turtle Beach, Inc.
- Address : 44 South Broadway, 4th Floor, White Plains, NY 10601, USA
- E-Mail : support@roccat.com
VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS, NY
10601, USA
© 2023 Voyetra Turtle Beach, Inc. All rights reserved. Any product names
mentioned in this manual may be trademarks or registered trademarks and are
the property of their respective owners. Information contained herein is
subject to change without notice. Voyetra Turtle Beach, Inc shall not be made
liable for any errors that may appear in this manual. This publication or
parts of it may not be reproduced without the express consent of the
publisher. ROCCAT® is a Turtle Beach Brand.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
BSMI https://bsmi.roccat.com/