Style Selections TB-24S071 Round Outdoor End Table Instruction Manual
- June 15, 2024
- Style SELECTIONS
Table of Contents
ITEM #5462216/5462217
NESTING END TABLES
MODEL #TB-24S071X/TB-24S071D-2
Style Selections and logo design are trademarks or registered trademarks of
LF, LLC. All rights reserved.
Thank you for purchasing this Style Selections product. We’ve created these
easy-to-follow instructions to ensure you spend your time enjoying the product
in-stead of putting it together. But, if you need more information than what
is provided here, please visit Lowes.com,
search the item number and refer to the Guides & Documents tab on the
product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
877-888-8225, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
ascs@lowes.com.
*Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| Parts won’t properly align. | Bolts tightened before assembly complete. | Loosen |
all bolts, properly align all parts according to assembly instructions, and only tighten bolts once assembly is complete.
CARE AND MAINTENANCE
- For cleaning, use a wet towel to wipe away dirt, then air dry.
- Due to the nature of steel, rusting can occur if the protective coating is scratched. To minimize this condition, it is recommended care be taken when assembling and handling the product in order to prevent the paint from being scratched.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes
NO ADDITIONAL TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Do not tighten all parts before assembly is complete.
- Do not sit or stand on the table.
- Do not use power tools to assemble this product.
CAUTION
- Small parts like washers may pose a choking hazard to young children.
- Keep out of reach of small children.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
- Lay the large tabletop (B) upside down (or top side down) on a soft flat surface. Use two bolts (AA) included to attach the tall table leg (C) to one set of the pre-drilled holes of large tabletop (B), using the provided allen wrench (BB). Repeat the steps above with the remaining tall table legs (C) until complete.
- Once all of the table legs (C), have been attached to the large tabletop (B), attach the large table base (A) to the tall table legs (C), using bolts (AA). Tighten with the allen wrench (BB) provided.
- Lay the small tabletop (E) upside down (or top side down) on a soft flat surface. Use two bolts (AA) included to attach the short table leg (F) to one set of the pre-drilled holes of small tabletop (E) using the provided allen wrench (BB). Repeat the steps above with the remaining short table legs (F) until comple.
- Once all of the short table legs (F), have been attached to the small tabletop (E), attach the small table base (D) to the short table legs (F), using bolts (AA). Tighten with the allen wrench (BB) provided.
Do not tighten hardware until assembly is complete.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>