DigittalLife UMB06 USB MIDI Interface Enclosure User Guide
- June 15, 2024
- DigittalLife
Table of Contents
DigittalLife UMB06 USB MIDI Interface Enclosure User Guide
Hardware Review
Package Contents
1 x UMB06 4i/4o MIDI Interface
1 x QIG
B) Hardware Installation
USB MIDI Mode Connection
Thru Mode / Merge Mode Connection
E: support@digitalife.shop
W: www.digitallife.shop
Version: v1.1
https://www.digitallife.shop/products/umb06
MODES
UMB06 4i/4o MIDI Interface
(A) Hardware Review
- Switch Button UMB06 working mode switch button. This is not a Power ON/OFF button.
- Power LED UMB06 is powered ON.
- Function LEDs UMB06 working mode LED indicators ( 3 Modes, 7 working status )
- MIDI Interfaces 5-Pin DIN MIDI Interfaces ( OUT, IN ) 5. USB Interface *
- Notice At MIDI Thru Mode and MIDI Merge Mode, please do not connect USB interface to computer’s USB port. An USB power charger is required ( 5V 0.5-1A, Not Included ).
(B) Hardware Installation
- If you only use the Basic MIDI Mode, Please connect the USB interface to computer’s USB2.0 Port.
- At MIDI Thru Mode and MIDI Merge Mode, please do not connect USB interface to computer’s USB port. An USB power charger is required ( 5V 0.5-1A, Not Included ).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>