VOKTTA 84V Battery Capacity Indicator Voltage Meter Instruction Manual

VOKTTA 84V Battery Capacity Indicator Voltage Meter

Instruction for use

1. S1:%V Rotate Display in 2s
2. S2: Inactivity Sleep in 10s
3. S3:Turn on backlight
4. S4:Show logo
5. S5:Discharge mode selection

S1:%/V Rotate display in 2s

Power percentage and voltage are displayed in turn recurrently and automatically;

S2: Inactivity sleep in 10s

Automatically sleep after battery capacity display for 10 s, save power, press the function key to wake up power display for 10 seconds;

S3: Turn on backlight

Power display turns on or off power backlight;

Setting procedure:

1. Disconnect the power supply of the power display module, press and hold these toting key to power on the power module, then release the setting key, the power display will show the current setting parameters of the power;

2. Short press the setting key to select the battery specification P/L/F (P=12Vlead acid, L=3.TV lithium battery, F=3.2V lithium iron phosphate battery);

3. Short press the function key to set the number of battery strings, press the function key and the setting key up or down to select the number of battery strings;
   For example, 4 pieces 12V lead-acid batteries with 48V, set to P4; similarly, 3pieces 3.7V lithium batteries in series, set to L3.

4. Short press the function key to set the number of battery strings, press the function key and the setting key up or down to select the number of battery strings;
   For example, 4 12V lead-acid batteries with 48V, set to P4; similarly, 3 3.7Vlithium batteries in series, set to L3.

5. Press and hold the function key to enter the advanced setting interface, press the setting key to select S1-S5, press the confirmation key to select or cancel;
   (In advanced mode, the small cells in the battery symbol and S1-S5 correspond, such as S3 corresponds to the third small cell in the battery symbol, select to display, not to display to cancel).

6. After setting and re-energizing the power supply, the setting data will be saved automatically. E.g. 10 pieces lithium batteries powered, power on percentage and voltage auto-rotate display (S1 mode).

Operation: Disconnect display module power, press and hold the setting button, power the power module, press the setting button for a short time to select L, press the function key to select 10,press the function key for a long time to select S1 and re-power.

Wiring method:

1. Use independent switch to control the power;
2. Use the load switch to control the power;
3. Long bright connection can be connected to the positive and negative battery output;

Setting instructions:

1. Refer to the setting procedure when setting up;
2. Avoid contact of conductive objects with the electronic component part at the back after power on to prevent short circuit damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>