AGHI 1500 Light Agila Instructions

AGHI 1500 Light Agila

Product Information

• Specifications
  • Model: AGHI 6061
  • Brand: agila
  • Product Type : SA-PS

Product Usage Instructions

• Safety Information
  • It is important to follow the safety guidelines to ensure proper and safe usage of the product:
  • Do not modify, rework, or re-mark the product as it can negatively impact its technical properties and may cause damage to other objects. The manufacturer cannot be held responsible for any damage caused by such changes.
  • Make sure to handle the product with care to avoid any physical harm.
  • Keep the product away from water and other liquids to prevent electrical hazards.
  • Do not expose the product to extreme temperatures or direct sunlight.
• Installation
  • Follow these steps for proper installation:
  • Choose a suitable location for the product.
  • Ensure that the installation surface is clean and dry.
  • Mount the product securely using the provided mounting hardware.
  • Connect the necessary cables and ensure proper connections.
• Operation
  • To operate the product:
  • Make sure the power source is compatible with the product’s requirements.
  • Turn on the product using the designated power switch or button.
  • Refer to the product’s user manual for specific operational instructions and features.
• Maintenance
  • To maintain the product’s performance and prolong its lifespan:
  • Regularly clean the product using a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive materials for cleaning.
  • Check for any loose connections or signs of damage and repair as necessary.
  • Refer to the product’s user manual for any specific maintenance instructions.
• FAQ
  • Q: Can I modify the product?
  • A: No, modifying the product can negatively impact its technical properties and may cause damage. The manufacturer does not take responsibility for any damage caused by such modifications.
  • Q: How should I clean the product?
  • A: You can clean the product using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Dimension

Installation

Safety Information

General Safety Information

• Installation, commissioning, and maintenance only by a qualified electrician.
• Never perform any work on the luminaire with voltage applied. Danger to life due to electric shock!
• The electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
• Damaged luminaires must not be operated.
• Observe and retain safety instructions and mounting instructions
• No liability is accepted for damages resulting from improper use.
• Use genuine parts only for repair.
• Ensure stability of the ceiling and fastening elements.
• The luminaire is exclusively intended for interior rooms and ambient temperatures not exceeding 25°C unless otherwise described by labeling the luminaire.

Operation of the luminaire

• Abnormal dark spots may be an indication of partial failure of LEDs. Inspect regularly and replace the luminaires affected. The luminaire’s light source (LED) must not be exchanged or replaced by the user.
• Exceeding the permissible ambient temperature will reduce the luminaireís lifecycle, resulting in premature failure in extreme cases.
• Avoid condensation of the luminaire.
• Any mechanical load to the LED circuit boards is not permitted.
• LEDs can be damaged by electrostatic discharge (ESD). This may result in total failure. Always avoid direct contact.
• Depending on their concentration, chemicals can corrode the LED modules and lead to a reduction of luminous flux, drift of luminous color, and/or total failure. Avoid direct contact with acids, bases, solvents, volatile organic compounds and oils. Ensure sufficient ventilation to prevent damage by gas release.
• Avoid ESD problems by not routing feed-through wiring directly along the wiring of the luminaire.
• Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.

Changes to our products

• Modification, reworking, and re-marking of products can hurt their technical properties, destroy them, and possibly cause consequential damage to other objects.
• The manufacturer cannot be held responsible for damage caused by such changes.
• + IP5x – dust nonconductive
• + IP6x – dust conductive and dust nonconductive

Information for service, cleaning, and disposal of luminaire

Instruction for luminaire service:

Instruction for end of life:

Instruction for luminaire-cleaning

Safety instructions in your national language can be found on the Internet at: doc.regiolux.de/safety_BG.pdf.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>