TZJZ PG-107 Home Alarm System Kit User Guide
- June 15, 2024
- TZJZ
Table of Contents
PG-107 Home Alarm System Kit
User Guide
PG-107 Home Alarm System Kit
Home Alarm System Kit
Quick install instruction Step by Step as below:
Step 1: Power the panel and turn on it: Open the package, plug the cable
to the adapter, connect the adapter to the wall outlet, open the back of the
panel, plug the usb cable to the panel to power it, turn on the panel by the
switch(open the back of the panel, then you will see it).
Step 2: Download the Smartlife APP on your cellphone: Search the “Smart
Life” on google store for Android, or app store for apple to download it. Or
Scan below QR code to download. And then register it.
| |
---|---|---
<http://qr12.cn/E6dEpG>|
[https://play.google.com/store/apps/](https://play.google.com/store/apps/details?id=com.tuya.smartlife)
[details?id=com.tuya.smartlife](https://play.google.com/store/apps/details?id=com.tuya.smartlife)|
<https://smartapp.tuya.com/smartlife> Step 3: Connect Wifi: When you connect WiFi(only 2.4GHz supported), please
make sure your cellphone is also using the WiFi(better to close 2G/3G/4G
signal on your cellphone first), Open the smartlife App–Click Add Device–Add
Manually–Sensors –Alarm(Wi-Fi)–Select or insert a WiFi(2.4GHz) and enter the
password and click next–Click Next and you will see Blink Quickly–Click Menu
of alarm panel–Click WiFi–Click Airlink Configure–Confirm reset Wifi– Click
Blink Quickly on APP–Adding device–Configuration OK on panel–Added
successfully on APP–Done
Step 4: Insert the SIM card, if you want to use a SIM card, open the back of
the panel, insert the SIM card. Then preset the phone numbers which you want
to receive calling or messages when alarm triggered. Click the Menu on the
panel- -Click Phone –Click 1st phone–type in the phone number and active the
phone calling and message texting functions–Done. You can add 5 phone numbers
at most. (Note: For 2G version, only 2G T-Mobile sim card supported) .
Step 5: Install the Hard-wired siren, open the back of the panel, plug the
siren cable head into the panel. Teal off the adhesive on the back of the
siren, put the siren on the wall next to the panel. Done.
Step 6: Install the PIR motion detector, take out the PIR motion detector base
and screws in the package, use screw, mount the base on the upper wall Conner
which pointing at door and sitting room or important entry ways or hallways
or stairwells, turn on the PIR motion detector(the switch is on the back) and
put it on the base. Done.
Step 7:
Install the Door Window Sensor: put the adhesive on the back of the door
window sensor, turn on it(switch on the back). Put the sensor on the door or
on the window. Done. 
Step 8: Connect panel with Alexa & Google Assistant if you have in your home
or office.
NOW you can ARM or DISARM this home alarm system kit by RFID tags, remote,
smartlife app, panel or voice, to get full protection for your home or office.