Walsunny Electric Height Adjustable Standing Desk User Manual

Walsunny Electric Height Adjustable Standing Desk

Product Information

Specification:

• Input voltage: 100-240VAC 50/60Hz 1.3A
• Output voltage: 29VDC 1.8A
• Loading capacity: 70KG
• Max speed: 20mm/s
• Height adjustable range: 700mm-1150mm
• Frequency of use: 10% work for 2 minutes and pause for 18 minutes
• Operating temperature: 0-40°C

Product Usage Instructions

Assembly

Packing List:

• 1 x Accessory 1
• 4 x Accessory 2
• 2 x Accessory 3
• 3 x Accessory 4
• 4 x Accessory 5

Step 1:

• Attach Accessory 2 to Accessory 1.

Step 2:

• Attach Accessory 3 to Accessory 1.
• Attach Accessory 6 to Accessory 3.

Step 3:

• Attach Accessory 5 to Accessory 3.
• Attach Accessory 2 to Accessory 6.

Step 4:

• Attach Accessory 1 to Accessory 2.
• Attach Accessory 2 to Accessory 3.
• Make sure Accessory 1 is tightened.

Step 5:

• Attach Accessory 9 to Accessory 8.

Step 6:

• Attach Accessory 2 to Accessory 8.
• Attach Accessory 9 to Accessory 8.

Operating Instructions

Attention:
Due to the built-in gyroscope in the control box, please confirm whether the control box has been fixed with the desktop before use, or keep the control box stable and not shaking, otherwise the LED screen will repeatedly display E05 and E08, which cannot be used normally!

Reset Settings:
When LED displays the RST, or the system is abnormal, you need to make the desk initialized.

1. Press and hold the DOWN button on the Handset until the desk reaches its lowest height.
2. Release the DOWN button.
3. Press and hold the DOWN button again for about 5 seconds until the desk lowers a little more, slightly rises, and stops.
4. Release the DOWN button.

Your desk is now ready to use.

Height Adjustment:

• Up: Press the Up button on the Handset.
• Down: Press the Down button on the Handset.

Memory Settings:
Save up to commonly used desk heights and recall them quickly.

1. Press the Up or Down key to move the desk to the height you want.
2. Press the S key, the display will flash for 5 seconds.
3. Within these 5 seconds, press one of the memory keys (1, 2, or 3) and the position will be stored.
4. The height of the memory is still preserved in case of power off.

To bring the desk back to any of these assigned heights, press the corresponding numbered button (1, 2, or 3).

Children Lock:
Lock your desk to prevent misoperation.

• Lock: Press down + simultaneously for 5 seconds until the LED reads Loc.
• Unlock: Press down + simultaneously for 5 seconds until the LED switches from Loc to the height display.

Height Limits:
Set your desk height as the max/height.

• Set max height: Press down + S simultaneously for 5 seconds, and the highest position storage is completed.
• Press down + S simultaneously for 5 seconds again, and the highest position storage is canceled.
• Set min-height: Press down + S simultaneously for 5 seconds, and the lowest position storage is completed.
• Press down + S simultaneously for 5 seconds again, and the lowest position storage is canceled.

Anti-collision Function Settings:
It is used to set the sensitivity of the lifting table to respond to obstacles when it runs up or down.

1. Press and hold the S key for 10 seconds.
2. Press the Up or Down button to switch parameters.
3. Press the S key to enter the corresponding parameters.
4. Press the Up or Down button to switch parameters.
5. Press the S key to save the settings.

Description:

• S-2: control box front and rear tilting sensitivity
• 0 = off, 1 = the least sensitive, 8 = the most sensitive, default = 4

FAQs

• Q: How do I reset the desk settings?
  A: Press and hold the DOWN button on the Handset until the desk reaches its lowest height. Release the DOWN button. Press and hold the DOWN button again for about 5 seconds until the desk lowers a little more, slightly rises and stops. Release the DOWN button. Your desk is now ready to use.

• Q: How do I adjust the desk height?
  A: Press the Up button to raise the desk and press the Down button to lower the desk.

• Q: How many memory positions can I save?
  A: You can save up to three different height positions using the memory keys (1, 2, and 3) on the Handset.

• Q: How do I lock and unlock the desk?
  A: To lock the desk, press down + simultaneously for 5 seconds until the LED reads Loc. To unlock the desk, press down + simultaneously for 5 seconds until the LED switches from Loc to the height display.

• Q: How do I set the max and min height limits?
  A: To set the max height, press down + S simultaneously for 5 seconds, and the highest position storage is completed. Press down + S simultaneously for 5 seconds again to cancel the storage. To set the min height, follow the same steps but with the lowest position.

• Q: How do I adjust the sensitivity of the anti-collision function?
  A: Press and hold the S key for 10 seconds. Use the Up or Down button to switch parameters. Press the S key to enter the corresponding parameters. Use the Up or Down button to switch parameters again. Press the S key to save the settings.

Specification

• Input voltage： 100～240VAC 50/60Hz 1.3A
• Output voltage： 29VDC 1.8A
• Loading capacity： 70KG
• Max speed： 20mm/s
• Height adjustable range： 700mm～1150mm
• Frequency of use： 10%（work for 2 minutes and pause for 18 minutes）
• Operate temperature： 0～40℃

Packing list

Assembly Instruction

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Operating Instruction

Attention:
Due to the built-in gyroscope in the control box, please confirm whether the control box has been fixed with the desktop before use, or keep the control box stable and not shaking, otherwise the LED screen will repeatedly display E05 and E08. which cannot be used normally!

1. Reset Settings

   • When LED displays the “RST”, or the system is abnormal, you need to make the desk initialized.
   • Press and hold the DOWN button on the Handset until the desk reaches its lowest height. Release the DOWN button. Press and hold the DOWN button again for about 5 seconds until the desk lowers a little more, slightly rises, and stops. Release the DOWN button. Your desk is now ready to use.

2. Height Adjustment

   • Up: Press Up “∧”
   • Down: Press Down “∨”

3. Memory Settings
   Save up to commonly used desk heights and recall them quickly.

4. Press the UP or DOWN key to move the desk to the height you want.

5. Press S key, the display will flash for 5 seconds.

6. Within these 5 seconds press one of the memory keys and the position will be stored.

7. The 1,2 and 3 keys on the hand control can store three different height positions. The height of the memory is still preserved in case of the power is off.

8. To bring the desk back to any of these assigned heights, press the numbered button.

9. Children Lock

   • Lock your desk to prevent misoperation.
   • Lock: Press down “∧+∨” simultaneously for 5 seconds until the LED reads “Loc”.
   • Unlock: Press down “∧+∨” simultaneously for 5 seconds until the LED switches from “Loc” to the height display.

10. Height Limits
    Set your desk height as the max/height.

    • Set max height:
    • Press down “∧+ S” simultaneously for 5 seconds, and the highest position storage is completed.
    • Press down “∧+ S” simultaneously for 5 seconds again, and the highest position storage is canceled.
    • Set min-height:
    • Press down “∨+ S” simultaneously for 5 seconds, and the lowest position storage is completed.
    • Press down “∨+ S” simultaneously for 5 seconds again, and the lowest position storage is canceled.

11. Anti-collision Function Settings
    It is used to set the sensitivity of the lifting table to respond to obstacles when it runs up or down.
    Operation:

12. Press and hold the “S” key for 10 seconds. (For example, LED screen displays “S-1”, and “1” flashes)

13. Press “∧” or “∨” to switch parameters. (For example, press “∧” once, and S-1 is changed to S-2)

14. Press “S” to enter the corresponding parameters. (For example, 4 is displayed by default, and “4” flashes)

15. Press “∧” or “∨” to switch parameters. (For example, press “∨” 4 times and change 4 to 0)

16. Press “S” to save the settings.
    Description:

  * “S-2”:control box front and rear tilting sensitivity （0=off、1=the least sensitive、8=the most sensitive,default=4）
  * “S-3”:upward current anti-collision sensitivity （0=off、1=the least sensitive、8=the most sensitive,default=4）
  * “S-4”:downward current anti-collision sensitivity （0=off、1=the least sensitive、8=the most sensitive,default=4）
  * “S-8”:control box left and right tilting sensitivity （0=off、1=the most sensitive、8=the least sensitive,default=8）  

Attention:
If the parameters corresponding to S-2, S-3, S-4, and S-8 are changed to 0, the sensitivity is closed, and E05 and E08 will not be displayed!

7. Restore Factory Settings
   At the same time hold “2+3+S” for 5 seconds, then the parameters restore to the factory state and force initialization.

Troubleshooting Guide

1. If any error codes appear, you need to reset it.
2. If your desk does not work properly, unplug the power supply for 20s, then plug the power supply back in, you may need to reset it.
3. If the data of the display screen is abnormal, please “restore factory settings” first, and then reset.
4. If the display screen is black, please unplug and plug all connecting wires again and confirm whether it is powered on again.
5. If the handset displays “HOT”, it indicates that the power supply temperature is too high, or it runs continuously for more than 2 minutes within 18 minutes, you need to wait for the power supply temperature to fall down.
   • Operation method: let the system rest for 18 minutes and run again.

If the error message persists after the reset procedure, contact your supplier.

Common fault approach

Safety Cautions

1. Product use according to the technical parameters.
2. Do not expose to sunlight or use in high-temperature environments, for indoor use only.
3. Pls keep away from corrosive gas and dusty environment, and also pay attention to water.
4. Non-professionals are not allowed to disassemble this product to prevent electric hazards.
5. Children are not allowed to play on the desk. When children play with the product, the behavior is unpredictable and manufacturers are not responsible for the Dangerous consequences.
6. Operate with knowledge of related hazards, Children aged eight or above and with Physical impairment、mentally handicapped people should be used under correct supervision and guidance.
7. When children are without supervision, users shall not clean and maintain the product.
8. If the power cord is damaged, it must be replaced by the manufacturer or the relevant professional to avoid injury.
9. Make sure your operating environment is not hazardous, for example, don’t throw your tools anywhere. And always be careful with packing materials, to avoid all possible dangers, if children play with plastic bags, posing a risk of strangulation.
10. Please keep the original packaging of the equipment if necessary, to be used for future transportation.

You are always welcome to contact us for any reason at all: Service- priority@hotmail.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>