LKKRO LHLK0801 Record Player Stand Instruction Manual

**LKKRO LHLK0801 Record Player Stand Instruction Manual

**

Introduction

General Guidelines

1. Please read the following instruction carefully and use the product accordingly.
2. Please keep this manual and hand it over when you transfer the product.
3. This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.LKKRO@outlook.com

Warnings

1. Children are not allowed to assemble the product. During assembly, keep small parts out of the reach of children as they may be fatal if swallowed or inhaled.
2. Children are not allowed to climb or stand on the product to avoid personal injury caused by the toppling.
3. Keep plastic packing bags out of reach of children to avoid any potential danger such as suffocation.
4. Avoid sharp objects and corrosive chemicals to prevent damage to the product or the user.
5. Please do not use the product if there is/are defective and/or missing parts, as this can result in damage or injury

Package Contents

• Record cabinet x1; User Manual x1

Product Specification

Notes

1. The item is only intended to be used indoors. Personal injury and/or damage to the product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design. The product must be assembled and used in accordance with the provisions of the manual The seller does  not assume any responsibility or liability with respect to any damage caused by incorrect assembly or improper use.
2. Do not place it in a damp environment for extended periods of time to prevent mildew
3. During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one.
4. Periodically inspect screw tightness while the product is in use. if necessary, retighten to ensure structural integrity

DISASSEMBLY DIAGRAM

ATTENTION During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one.

HARDWARE LIS

1. 1PCS

2. 1PCS

3. 1PCS

4. 1PCS

5. 1PCS

6. 2PCS

7. 1PCS

8. 1PCS

9. 4PCS

PARTS LIST

1. 6PCS

2. 6PCS

3. 14PCS

4. 4PCS

5. 4PCS

6. 1PCS

7. 1PCS

STEP 1

Attention！ When installing boards ⑤⑥ , ensure that the hole orientations on the board surfaces are consistent, with the larger circular holes positioned at the top. (The larger holes on the side board are designed for the installation of the three-in-one bolt on the top board, as illustrated in step 4 for angle reference, to ensure proper installation and avoid the need for reassembly later

STEP 2

STEP 3

STEP 4

If the cover cannot be placed, please patiently make multiple adjustments. This is a normal phenomenon because the screws are not inside the nuts. Try changing the orientation of the nuts

STEP 5

STEP 6

STEP7

STEP8

Need More Help:

• Email address : Lkkro@outlook.com
• Warranty :18 months
• Lifetime customer service support
• Address: DD YL186 11828 CLASSIC LN FORNEY TX 75126 US
• Facebook Page: https://www.facebook.com/profile.php?id=100083412887490

Feel Free to Let Us Know If Any Question

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>