IKEA TRIXIG Screwdriver Drill Li-Ion 12 V Instructions
- June 13, 2024
- Ikea
Table of Contents
IKEA TRIXIG Screwdriver Drill Li-Ion 12 V
BATTERY
Read the instruction manual before first use.
CAUTION
- Do not modify, disassemble, open, drop, crush, puncture, or shred battery.
- Do not expose the battery to rain or water.
- Risk of fires and burns. Do not open, crush, heat above 50°C (122°F), or incinerate.
- Keep the battery away from open flame or sunlight to prevent heat build-up.
- Keep the battery away from high-voltage devices.
- THIS PRODUCT IS NOT A TOY, KEEP AWAY FROM CHILDREN.
- Ensure that all persons who use this product read and follow these warnings and instructions.
- Do not short-circuit the battery or its cells.
- In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes.
The battery charging indicator
- Pulsating light – charging in progress
- Steady light for two minutes/no light
- charging completed
- Small LED divided into three circles showing the charge amount left in the battery.
- Press the button located on the back to see the charge amount. The light will turn off shortly after.
Good to know
- It is normal for the battery to become hot during charging and it will gradually cool down after charging.
- Charging time may vary depending on the remaining charge, battery age, and ambient temperature.
- Charger operation temperature: 0°C to 50°C.
- Disconnect the battery from the power outlet before cleaning or when it is not used.
- Battery should not be left discharged for a longer period.
- Battery should not be charged while in contact with flammable material like textiles.
- This battery can only be used with a TRIXIG drill
- USB-C cable not included
CARE INSTRUCTION
To clean the unit, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe dry.
NOTE!
Never use abrasive cleaners or chemical solvents since this can damage the
product.
Product Servicing
Do not attempt to repair this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks.
Technical data
- Type: ICBL 10.8-16-USBC-P1
- Nominal voltage: 10.8 V d.c.
- Rated voltage: 12.0 V d.c.
- Capacity: 1.5Ah Lithium-Ion, 16.2Wh
- Input: 5.0 V d.c. / 1.0-3.0A (USB-C)
- This device conforms to UL STD. 2054
For indoor use, only Rechargeable Li-Ion battery cells are inside. (Three INR19/66 Li-ion cells connected to a group in series)
Charging time:
If you use 5.0V 1.0A charge current – charging time < 360 min If you use 5.0V
2.0A charge current – charging time < 210 min If you use 5.0V 3.0A charge
current – charging time < 150 min
- Do not open or dismantle.
- Do not dispose of it in the fire.
- Do not short circuit.
Do not store the tool and battery pack in locations where the temperature may reach or exceed 50 °C
LIION
To preserve natural resources, please recycle or dispose of the battery
pack properly. This battery pack contains Li-ion batteries. Consult your local
waste authority for information regarding available recycling and/or disposal
options. Discharge your battery pack by operating your drill. Then remove the
battery pack from the drill housing and cover the battery pack connections
with heavy-duty adhesive tape to prevent any short circuit and energy
discharge. Do not attempt to open or remove any of the components
Keep this manual for future use
- Manufacturer: IKEA of Sweden AB
- Address: Box 702, SE-343 81 Älmhult, SWEDEN
Batteries and rechargeable batteries are not household waste! As a consumer, you are required by law to dispose of all batteries and accumulators, whether they contain harmful substances* or not, at a collection point in your municipality/neighborhood or via a commercial entity offering battery disposal so that they can be disposed of in an environmentally sound manner.
- marked with: Cd = cadmium, Hg = mercury, Pb = lead
Caution!
Make sure that the battery is discharged before removal. Use caution to avoid
damaging the battery. Cut and isolate wires one by one to avoid short
circuits.The crossed-out wheeled bin symbol indicates that the item should be
disposed of separately from household waste. The item should be handed in for
recycling in accordance with local environmental regulations for waste
disposal. By separating a marked item from household waste, you will help
reduce the volume of waste sent to incinerators or landfills and minimize any
potential negative impact on human health and the environment. For more
information, please contact your IKEA store.
Type Approved Safety
- Regular Production
- Surveillance
- www.tuv.com
- ID 1111265732
- Inter IKEA Systems B.V. 2023
- AA-2395358-5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>