IKEA ÖVERSIDAN LED Wardrobe Lighting Strip with Sensor Instruction Manual
- June 13, 2024
- Ikea
Table of Contents
IKEA ÖVERSIDAN LED Wardrobe Lighting Strip with Sensor
Product Information
- This product is designed for indoor use only.
- Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, do not use the product.
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
- Only use a safety transformer with a SELV (Separated Extra Low Voltage) output as a supply for the product.
- Use only IKEA LED drivers suited for this product. The total wattage of the lamps connected to one LED driver must not exceed the maximum power stated on that LED driver and never more than 30W.
- LED driver and power supply cord are sold separately.
Product Usage Instructions
- Always choose screws and plugs that are specially suited to the material of your wall or surface.
- If the light source of the luminaire reaches its end of life, replace the entire luminaire.
- When using a transformer, make sure it has a SELV output to ensure safety.
- Ensure that the total wattage of the lamps connected to one LED driver does not exceed the maximum power stated on the driver, and never exceed 30W.
- Make sure to purchase the appropriate IKEA LED driver and power supply cord separately.
IMPORTANT SAFETY INSTRUCTIONS
- For indoor use only.
- Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.
- Important information! Keep these instructions for future use.
- Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- ONLY USE A SAFETY TRANSFORMER WITH A SELV OUTPUT AS A SUPPLY FOR THE PRODUCT.
- Use only IKEA LED drivers suited for this product.
- The total wattage of the lamps connected to one LED driver must not exceed the maximum power stated on that LED driver and never more than 30W.
TOOLS
INFO
PARTS
INSTALLATION INSTRUCTIONS
- LED driver and power supply cord are sold separately.
© Inter IKEA Systems B.V. 2021 2023-09-25 AA-2291179-3.
Read User Manual Online (PDF format)
Loading......