U-BOAT Solotempo Classic Watches User Guide
- June 13, 2024
- U-BOAT
Table of Contents
U-BOAT Solotempo Classic Watches
WATCH FUNCTIONS
A CROWN
B HOUR HAND
C MINUTE HAND
D SECONDS HAND
E DATE
F DAY
USER INSTRUCTIONS
POSITION 1
NEUTRAL POSITION| to wind up and start the watch, turn the crown A
** clockwise.
---|---
POSITION 2
FIRST CLICK| pull the crown A ** out to position 2. Turn the crown
A ** clockwise to set the desired date E **. Rotate the crown
A ** counterclockwise to set the desired day F **.
POSITION 3
SECOND CLICK| pull the crown A ** out further to position 3. Rotate
the crown A ** to set the desired time.
2. ** Press the crown A ** all the way down to return it to
position 1.
-
POSITION 1
NEUTRAL POSITION -
POSITION 2
FIRST CLICK -
POSITION 3
SECOND CLICK
CARE AND MAINTENANCE
- Your watch will keep its performance intact for a long time, with proper care.
- We recommend that you have your watch checked every 3-4 years at one of our Authorized Dealers/Authorised Service Centres, to carry out ordinary maintenance on all mechanical parts and water resistance.
- We also recommend contacting an Authorized Dealer/Authorised Service Center to replace the strap.
- Do not leave the watch in places exposed to extreme temperature changes, humidity, the sun and strong magnetic fields.
- Make sure the watch is suitable for use in water.
- Always rinse the watch with fresh water after contact with salt water.
AUTOMATIC WATCHES REQUIRE MANUAL WINDING FOLLOWING A LONG PERIOD OF INACTIVITY.
Customer Support
Via Pesciatina 751H
Gragnano, Capannori – 55010 Lucca – Italy
Tel: +39 0583 469288 – Fax: +39 0583 462249
www.uboatwatch.com –
service@u-boatwatch.com
