Style SELECTIONS FSI 1475E BRNZ Florine 28-in to 48-in Oil-Rubbed Bronze Steel Single Curtain Rod Instruction Manual

Style SELECTIONS FSI 1475E BRNZ Florine 28-in to 48-in Oil-Rubbed Bronze

Steel Single Curtain Rod

Product Information

The Style Selections Drapery Rod is a high-quality product designed for hanging curtains. It is available in various models, including FSI 1457E BGLD, FSI 1457F BGLD, FSI 1457E BNIC, FSI 1457F BNIC, FSI 1457E MBLK, FSI 1457F MBLK, FSI 1475E BRNZ, FSI 1475F BRNZ, FSI 1475E BNIC, FSI 1475F BNIC, FSI 1475E MBLK, FSI 1475F MBLK, FSI 1172E BNIC, FSI 1172E MBLK, FSI 1172F BNIC, and FSI 1172F MBLK.

Please note that the appearance of the actual product may vary from the image shown in the manual.

Product Usage Instructions

• Step 1: Check the levelness of the drapery rod. If it is not level, proceed to the next step.
• Step 2: Tighten the drapery rod hook if it is loose.
• Step 3 : Ensure that the drapery hooks are anchored correctly. If possible, attach them to wall studs. If not, use the anchors and screws supplied with the product.
• Step 4 : Carefully follow the package contents and hardware contents instructions to assemble the drapery rod.
• Step 5: Adjust the height of the bracket using it as a guide. Remove the bracket from the wall and drill a pilot hole using a 3/16 in. bit (not included). Insert wall anchors into the holes.
• Step 6: Fit the drape(s) onto the rod.
• Step 7: Repeat steps 1 to 3 for additional brackets if needed. Use a level (not included) to ensure proper alignment.
• Step 8: For 28-48-in drapery rods, fit the rod with drapes onto the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
• Step 9: For 48-84-in drapery rods, repeat step 8.

STYLE SELECTIONS and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Thank you for purchasing this Style Selections product. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product in-stead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.

If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 877-888-8225, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.

REPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

• Estimated Assembly Time: 30 minutes

TOOLS REQUIRED (NOT INCLUDED)

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit lowes.com for more information.

PACKAGE CONTENTS

HARDWARE CONTENTS

INSTALLATION OVERVIEW

1. Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.

2. Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors. NOTE: Anchors are not needed for all installation types.

3. Attach the adjustable bracket to the wall using the screws provided. Next adjust the bracket distance out from the wall as desired and tighten with screws provided.
   NOTE: Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessary.

4. Fit drape(s) (not included) on rod.
   28-48-in Drapery Rods/ Varillas para cortinas de 71.12 cm a 121.92 cm

5. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.
   48-84-in Drapery Rods/Varillas para cortinas de 121.92 cm a 213.36 cm

6. Fit the rod, with drapes (not included), on the mounting brackets and position the finials as desired. Tighten the screws on each bracket to secure.

TROUBLESHOOTING

Drapery rod not level.

| Drapery hooks not installed correctly.| Make sure to use level (not included) during installation.
Drapery rod hook is loose.| Drapery hooks not anchored correctly.| Attach drapery hooks to wall studs if possible. Use anchors and screws supplied if you can’t attach to stud.

CARE AND MAINTENANCE

• Clean with a soft cloth.
• Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>