Axel Technology MR Light RGB Studio Lamp User Manual

Axel Technology MR Light RGB Studio Lamp

Product Information

MR Light RGB is a multipurpose signal lamp designed for use in Radio, TV, on air, production, and recording studios. It is also suitable for other environments where a signaling light is required, such as audio booths, meeting rooms, and offices. The lamp is highly configurable to meet customers’ needs in terms of color, wording, graphics, brightness, and operating mode. The MR Light RGB is easy to install in any environment and condition. It can be installed far from the power socket, and the  cable can be extended as per the customer’s convenience. The lampis made of high-quality components and materials, ensuring a modern design and no need for maintenance.

Features

• Multi-colored with glimmering RGB LEDs
• Customizable wording with text and graphics (logos, icons, symbols, and ideograms)
• Modern operating modes: blink, blink 2-colors, stand-alone ON mode
• 2 easy configuration buttons
• Supplied with mounting kit for wall or ceiling installation
• Single cable
• GPIs for remote control
• Easy setting for color, switching mode, and brightness
• High availability and low power consumption
• 12V DC power supply with power protection

Product Usage Instructions

Wall Position:

1. Remove the 2 screws of the external cover.
2. Remove the other 2 screws in the second cover.
3. Remove the cylinder in plexiglass.
4. Remove the opposite cover.
5. Place the MR Light RGB in the final position on the wall to mark the position of 3 holes (2 for screws and 1 for the cable).
6. Drill the wall and fix the MR Light RGB with 2 wall plugs and screws.
7. Re-insert the black film and the plexiglass tube in the correct position.
8. Finally, insert the external cover and lock it with 2 screws.

Ceiling Position:

1. Place the external cover in the final position on the ceiling to mark the position of 2 holes.
2. Drill the ceiling and fix the cover with 2 wall plugs and screws.
3. Re-mount the MR Light RGB with 2 screws.

PRODUCT OVERVIEW

• MR. LIGHT RGB is the new multipurpose signal lamp devsigned for Radio, TV, on air, production and recording studios. The lamp is also ideal for any other environment where a signalling light is required such as audio booths, meetng rooms and offices. It’s highly configurable to match customers’ needs: colour, wording, graphics, brightness and operating mode.
• MR. LIGHT RGB has been designed to be easily installed in any environment and condition. That allows its installation even far from the power socket and cable can be extended at the customers convenience.
• MR. LIGHT RGB is made of high quality components and material that guarantee modern design and no need for maintenance.

MR LIGHT RGB supplied:

• Multi coloured with glimmering RGB LEDs.
• Customisable wording with text and graphics (logos, icons, symbols and ideograms).
• Modren Operating mode: blink, blink 2-colours, Stand-alone ON mode.
• 2 easy configuration button.
• Supplied with mounting kit: wall, ceiling. Just 1 cable.
• GPIs for remote control.
• Easy setting for colour, switching mode and brightness
• High availability and low power consumption
• Power protection
• 12V DC power supply

HOW TO MOUNT THE MRLIGHT RGB

Flag position

• Remove the 2 screw of external cover:
• Remove other 2 screw in the second cover:
• Remove the cylinder in plexiglass:
• Remove the film with written:
• Remove the opposite cover:
• Place the MR Light RGB in the finel position on the wall for mark the position of 3 holes( 2 for screw and 1 for cable):
• Drill the wall and fix the MRLight RGB with 2 wall plug and screw:
  • Final fix
  • Alternative final fix
• Re-insert the black film and the plexiglass tube in correct position:
• Finally insert the externa cover and lock it with 2 screw:

CEILING POSITION

• Remove the 2 screw of external cover:
• Place the external cover in the finel position at the ceiling for mark the position of 2 holes:
• Drill the ceiling and fix the cover with 2 wall plug and screw.
• Re-mount the MRlight RGB with 2 screw:

WALL POSITION

• Remove the 2 screw of external cover:
• Place the external cover in the finel position at the wall for mark the position of 2 holes:
• Drill the wall and fix the cover with 2 wall plug and screw.
• Re-mount the MRlight RGB with 2 screw:
• It’s able to change the colour and the lighting mode form two buttons at the side of MR LIGHT RGB:
• By pressing the button P1, on the left the color is changed in the loop, see the following figure Fron this button you can change sequentially between seven colours.
• From the button P2 can change lighting mode. That able to switching between 6 modren lighting mode like (flashing, flashing in two colours, sweeping colours).
• Press and hold the P2 button for 3 secunds to set the MR Light RGB in show mode. SHOW MODE it will set all colours and lighting mode in loop.

POWER CONNECTIONS

MR Light RGB have three way to connect to the power surce. The item is comeing with two power connectors ( X6, X7) type 5.5mm, and one connector ( X5 ) type 2pin terminal connector. From any stable 12v can feeds it by one of three ways and that to gave more confortable.

• With X6 connector don’t need to open the item to connect it. See the next figure.
• If that need to hide the male plug connector can use X7 to feeds the device. See the next figure.
• And it is also abble to feeds it by X5 the 2pin terminal connector. See the next figure.

Attention: That can not use more than one power source simultaneously! MR Light RGB can works as stand alone or can control it by 2 GPI port optocouplers (X3, X4). To active the GPI control mode, connect the comand cable to X3 or X4 by 2pin terminal connector and release the stand alone jumper.
Note: GPI1 and GPI2 bouth of then do the same things.

TECHNICAL SPECS

PSU

Power Supply| 90-260 Vac / 47-63 Hz 15W
connection
GPI Inputs| 2 GPI
Panel Leds| 100
Operating Temperature| 0°C ÷ 40°C
Dimensions
Dimensions (W; D)| 100 x 330 mm
Weight| 0.75 Kg

WEEE DIRECTIVE – INFORMATIVA RAEE

In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling.

WARRANTY

The manufacturer offers a one-year warranty ex-works. Do not open the equipment. Any breaking of the seals will result in forfeiture of the same. The manufacturer is not liable for damages of any kind arising from, or in connection with, the use of the wrong product.

Declaration of Conformity

The undersigned Giuseppe Vaccari
As legal representative of the company
Axel Technology Srl based in: Via Caduti di Sabbiuno, 6/F – 40011 – Anzola Emilia (BO)
VAT number: IT01735031203

Declares

• Declares that the product: Multicolor RGB LED On-Air lamp. Operating mode: flashing, pulse. Wi-fi and GPI for remote control. Low power consumption. 12Vdc power supply and installation kit included.
• Model and/or code: MRLightRGB
• Date of manufacture: see label on the product
• Serial number: see label on the product

It was built in compliance with the following directives and standards:

• Directive 2014/35/EU known as the “Low Voltage Directive”
• Directive 2014/30/EU known as the “Electromagnetic Compatibility Directive”
• Directive 2011/65/EC known as “RoHS”
• Commission Delegated Directive (EU) 2015/863 of 31 March 2015 amending Annex II of Directive 2011/65/EU
• Directive 2012/19/EU known as “WEEE”
• Directive 2001/95/EC known as “General product safety”
• UNI EN ISO 7010:2021 Title: Graphic signs – Colors and safety signs – Registered safety signs
• EN 62368-1:2018 – relating to electrical safety for computer equipment and audio/video products
• IEC 62311:2019 – Evaluation of electronic and electrical equipment with regard to restrictions on human exposure to electromagnetic fields (0 Hz – 300 GHz)
• EN 55032:2015+A1:2020 – Electromagnetic compatibility of multimedia equipment. Issue requirements
• EN 55103-2:2010 Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity.
• EN 60065:2019 Audio, video and similar electronic equipment Safety requirements.
• EN 61000-6-1:2016 – EMC – Immunity for residential, commercial and light industry environments.
• EN 61000-6-3:2020 – EMC – Emission for residential, commercial and light industry environments.
• EN 60950-1:2014 – Safety of ITE (Information Technology Equipment)
• EN 55024:2017 Information technology equipment – Immunity characteristics Limits and methods of measurement.
• EN IEC 63000:2018 New harmonized standard to demonstrate RoHS compliance
• EN 55032:2015+A11:2020 Electromagnetic compatibility of multimedia equipment – Emission requirements
• EN 55035:2017 – Electromagnetic compatibility of multimedia equipment – Immunity requirements

And it is therefore compliant with current directives and regulations. This declaration of conformity is issued under the sole responsibility of the manufacturer.

Date: 15/6/2023
Place: ANZOLA DELL’EMILIA (BO) – ITALY

Signature:

axeltechnology.com. MR Light RGB Flag position

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>