KEYGEARS WASH01 Wash UltraCraft Washing User Manual
- June 12, 2024
- KEYGEARS
Table of Contents
KEYGEARS WASH01 Wash UltraCraft Washing
Product Information
This product is designed to comply with the FCC (Federal Communications Commission) regulations. It operates within the guidelines set forth in part 15 of the FCC Rules.
The device is built to meet two conditions:
- It should not cause harmful interference to other devices.
- It must accept any interference received, even if it results in undesired operation
The equipment also complies with FCC radiation exposure limits for an uncontrolled environment. It is important to note that there should be a minimum distance of 20cm between the radiator (transmitter) of this equipment and your body. This ensures that the radiation exposure remains within acceptable limits. Additionally, it is advised not to place or operate this transmitter in conjunction with any other antenna or transmitter.
Product Usage Instructions
- Ensure that the device is placed at least 20cm away from your body during operation.
- Avoid placing or operating this transmitter near any other antenna or transmitter.
- Do not make any changes or modifications to the device that are not expressly approved by the responsible party for compliance, as it may void your authority to operate the equipment.
- If the device causes interference to other devices, try adjusting its position or contacting the manufacturer for assistance.
- If you experience undesired operation due to interference, try relocating the device or contacting the manufacturer for further guidance.
This quick start must be read and understood before operating the machine. Thank you for choosing HeyGears. For safety, please contact HeyGears support staff for assistance regarding unpacking and installing the machine. If you fail to comply with the instructions in this manual, HeyGears will not be liable for the consequential damages unless required by federal and local ordinances. Please keep this operation manual properly for future reference. The pictures are for reference only and the products are subject to the actual product.
Items & Parameters
Components
Installation Requirements
Operation Steps
-
STEP 1
Take out the washing unit from the package and place it on an even, horizontal surface. Use the power cord supplied in the package for connecting to the mains, then turn on the start button. The screen lights up means it connect to the power supply successfully.
-
STEP 2
Take out two washing boxes and their lids in package and separate them. Put the model in it.
-
STEP 3
Put the washing box on the washing unit and rotate the knob to select “Wash”, then select the washing time and speed as recommeded in parameters page. Press the konb to start washing after selection.
-
STEP 4
Remove the washing box when washing finished, and put it on the other empty box, then rotate the cleaning agent valve to ON, turn on the air-in switch. The alcohol will flow out naturally.
-
STEP 5
After the alcohol is drained, trun off the cleaning agent valve and air-in switch. Remove the models from the washing box, and store the two boxes properly.
-
STEP 6
Next time if you need to wash, just place the model face up into the empty box, then stack the two boxes as in Step 4. Turn on the cleaning agent valve and air-in switch, then wait for the alcohol to flow into the box with models, then follow the guidelines in Step3 to finish washing.
Cautions
- Please clean the washing box with the supplied brush when a large amount of resin residue in it.
- Please store the box containing alcohol properly when washing is finished. Cover the lid tightly and turn off the air-in switch.
- The washing unit may cause the table to shake during working, so please avoid placing objects that can be easily poured or open containers with other liquids nearby.
CONTACT
- heygears.com
- info@heygears.com.
- Tel: +1 318-353-4295 (Global)/ +1 949-418-9418 (USA) +44 148-396-8549 (EU)
- 9 USA-17931 Sky Park Circle, Suite E, Irvine, CA, 92614
- CHN-Block B2, 501, 601, Enterprise Accelerator, Kaifa District, Guangzhou City
- Follow us @HeyGears
FCC STATEMENT
FCC Compliance
Information Statement
Caution
Caution: The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This device complies with part 15
of the FCC Rules. Operation is subject to the following two conditions: This
device may not cause harmful interference, and © this device must accept any
interference received, including interference that may cause undesired
operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reason- able protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>