HADA HL-Y15W Wireless Charging PCBAC User Manual
- June 12, 2024
- HADA
Table of Contents
HADA HL-Y15W Wireless Charging PCBAC User Manual
INDICATOR LIGHT DESCRIPTION
| statecolour | Power on | Standby | Charging | Full | FOD | warning |
|---|---|---|---|---|---|---|
| greenlightGreen | Light up 3 times | Red light on | breathe | Green light always | ||
| on | Flashing red light | Flashing red light |
BASIC PERFORMANCE PARAMETERS
-
Input voltage： DC12V±0.25V
Input Current：DC12V 2A-max， -
Stand-bypowerconsumption： ≤0.2W
-
WorkingFrequency： 115KHz-205KHz
PROTECTION REQUIREMENT
OCP
current-limiting is 12V 1.8A.
The short-circuit protection test is that when RX output short-circuit to the ground, the input power of the product will be reduced and no damage will be caused. When the short-circuit cond
The MTBF should not be less than 30000 hours at the temperature of 25℃
WEIGHT
17.5 g±0.2 g
PRODUCT SIZE、 PICTURE
35351.2mm
ROHS REQUIREMENT
The wireless charger shall meet ROHS.
STATEMENT
The final interpretation of this specification belongs to Zhongshan HonglanElectronic Technology Co. , Ltd.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
FCC ID：2BBVH-HL-Y15W
CHANGE LIST
| Rev. | Description | Date | Name | Remark |
|---|---|---|---|---|
| Before | After | |||
SPECIFICATION FOR APPROVAL
CUSTOMER ：
__
CUSTOMER P/N:
MATERIAL NO.：
PRODICT NAME ： Wireless charging PCBAC
HL_Y15WSPECIFICATIONS ：
MODEL NO. ：
ENVIRONMENTAL PROTECTION : ROHS
PCB COLOR ： □ Black ■Green
REMARKS ：
| （ Honglan Electronic ） | CUSTOMER APPROVAL |
|---|---|
| EDIT | Electronic Confirm |
Zhongshan Honglan Electronic Technology Co. , Ltd.
2F, 12 Nam Shing Lane, Yik Lung Road, Xiaolan, new Zhongshan
TEL： （+86）177 2459 9870 FAX：
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>