Amazen TCD220009AA Flexible Shaft Coupling Instruction Manual
- June 12, 2024
- Amazen
Table of Contents
Amazen TCD220009AA Flexible Shaft Coupling Instruction Manual
Thank you for choosing our Autonics product.
Read and understand the instruction manual and manual thoroughly before
using the product.
For your safety, read and follow the below safety considerations before
using.
For your safety, read and follow the considerations written in the
instruction manual, other manuals and Autonics website.
Keep this instruction manual in a place where you can find easily.
The specifications, dimensions, etc. are subject to change without notice for
product improvement. Some models may be discontinued without notice.
Follow Autonics website for the latest information.
Cautions during Use
-
Couplings are for transferring rotation angle and power between shafts.
Before using this, make sure to check the purpose and appropriacy. -
This product uses high strength aluminum alloy and has spring power as Radial beam type. However, if the coupling is dropped, hit or applied excessive power, it may be damaged or transformed.
-
If the coupling is applied over the rated misalignment, or the tolerance of the shaft is over the allowable value, it may cause plastic deformation, damage of the product or shorten the life cycle.
-
When it occurs abnormal sound during operating the equipment with this coupling, stop the operation and remove the cause such as misalignment, unscrewing, or rotation hazard.
-
If this coupling is applied to the equipment which has big fluctuation of load, shaft may be loose by unscrewing.
Tighten the screw securely and prevent from unscrewing. -
This product is for transferring rotation power. If there is a risk of human contact, attach the caution label or install a safety cover in a prominent position.
-
Rated torque is available to transfer the power continuously.
Check the rated capacity before using this product. -
Max. torque is available to transfer the power in a moment.
Check the rated capacity before using this product.
Ordering Information
This is only for reference.
For selecting the specified model, follow the Autonics website.
Cautions during Installation
-
It must be used within the rated allowable misalignment range.
When using the flexible coupling over the rated misalignment range, it may cause vibration or shorten the life cycle. -
When there are more than two misalignments, each allowable value is 50%.
-
It is recommended to use the flexible coupling below 1/3 of the allowable misalignment value to extend the life of the coupling and the applied equipment.
Specifications
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
■ Clamp type
■ Set screw type
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-2-2048-1577 |
sales@autonics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>