HML-2 Kawai Musical Instruments Instruction Manual

HML-2 Kawai Musical Instruments

Product Information:

• Product Name: HML-2
• Purpose: Piano stand for digital pianos
• Included Parts: – Screw (6x60mm) x 4
• Cap x 4 – Screw (5x25mm) x 4
• Hole patch x 8

Product Usage Instructions:

1. Adjusting the fall prevention glides:
   • If the instrument will be placed away from a supporting wall, use the tip-prevention glides.
   • Remove the two screws and reposition the glides located on the underside of the left and right Side Boards A B.
   • Reattach the glides so that they protrude outward, improving the stand’s stability.
2. Assembling the side boards A B and back board C:
   • Attach the Back Board C to the left and right Side Boards A B using two screws (6x60mm) on each side.
   • UEnsure that all four screws are firmly tightened.
   • Place caps over the four screws.
3. Mounting the digital piano onto the stand:
   • Carefully lift the digital piano onto the assembled stand.
4. Attaching the digital piano to the stand:
   • Fasten the underside of the digital piano to the assembled stand using two screws (5x25mm) on each side.
   • Ensure that all four screws are firmly tightened. 5.

Affixing hole patche

• If there are holes in the side boards A B,affix hole patches to hide them.
• Affix hole patches when not using the optional pedal unit (F-351).
  Note: Please ensure that all screws are firmly tightened and follow all safety precautions mentioned in the user manual.

Assembly Instructions

1. Do not use this stand for any purpose other than its intended use as a piano stand.
2. At the final stage of assembly, ensure that all screws are firmly tightened.
3. Do not drag the product along the floor. Take care not to drop the product.
4. Do not stand on the product or exert excessive force.
5. If any screws are found to be loose, tighten them immediately.
6. Do not lean on the piano.

Included parts

Before attempting to assemble the digital piano stand, please ensure that all parts below are included. A Phillips-head screwdriver (not included) will also be required in order to assemble the stand.

1. Adjusting the fall prevention glides
   If the instrument will be placed away from a supporting wall, the tip- prevention glides should be used to improve the stand’s stability. Remove the two screws, then reposition and reattach the glides located on the underside of the left and right Side Boards A B. The extended glides should protrude outward, improving the stand’s stability.

2. Assembling the side boards A B and back board C
   2- 1
   Attach the Back Board C to the left and right Side Boards A B using two screws a on either side.

• Ensure that all four screws are firmly tightened.
  2- 2
  Place Caps b over the four screws.

  3. Mounting the digital piano onto the stand
     Carefully lift the digital piano onto the assembled stand.

  4. Attaching the digital piano to the stand
     Fasten the underside of the digital piano to the assembled stand using two screws c on either side.

• Ensure that all four screws are firmly tightened.

Affix hole patches d for hiding the holes in the side boards A B

Affix hole patches d for hiding holes when not using the optional pedal unit (F-351).

Copyright © 2022 Kawai Musical Instruments Mfg. Co.,Ltd. All Rights Reserved.
SP00001254
Printed in Indonesia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>