NANW EZE-AT Smart Watch Charging Dock Instructions
- June 12, 2024
- NANW
Table of Contents
EZE-AT Smart Watch Charging Dock
Instructions
EZE-AT Smart Watch Charging Dock Instructions
Product Information
| Product Name | USB Charger Dock |
|---|---|
| Material | Aluminum alloy, ABS, PC, PVC |
| Size( LWH） | 725591.5mm |
| Weight | 94g |
| USB Cable Lengt | 1.3m |
| Input | DC5V/1A |
| Compatible Devic | Samsung Galaxy Watch Active |
Samsung Galaxy Watch Active 2 40mm
Samsung Galaxy Watch Active 2 44mm
Samsung Galaxy Watch 3 41mm
Samsung Galaxy Watch 3 45mm
Samsung Galaxy Watch4 Classic 42mm
Samsung Galaxy Watch4 Classic 46mm
Samsung Galaxy Watch4/5 40mm
Samsung Galaxy Watch4/5 44mm
Samsung Galaxy Watch 5 Pro 45mm
Note: It won’t charge if your watch isn’t the above model.
Precautions:
- Please use the Power Outlet (Output:5V/1A or 5V/2A) produced by the reliable manufacturer.
- Please make sure your watch is placed in the center of the dock. Avoiding poor contact or slow charging caused by the watch strap or any other thing interfering with the contact between the watch and dock.
- Please don’t use the product in humid, hot environment.The watch will reduce the charging speed to ensure safe charging when the temperature is over high. It is recommended to use this product at room temperature of 0-28 ℃.
- Please don’t use organic solvents such as detergent to wipe the dock. Please clean it with wet cloth and protect the charging pins away from water.
- It is strictly forbidden to dismantle the product and keep it close to the fire source.
- Children or pets should not be exposed to this product.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
MADE
IN CHINA
Documents / Resources
| NANW
EZE-AT Smart Watch Charging
Dock
[pdf] Instructions
2BA6N-EZE-AT, 2BA6NEZEAT, EZE-AT Smart Watch Charging Dock, Smart Watch
Charging Dock, Watch Charging Dock, Charging Dock
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>