blinds2go TUISS SmartView App User Guide
- June 4, 2024
- blinds2go
Table of Contents
Quick-Start Guide
TUISS SmartView
Downloading the App and Adding Your First Blind
1. Either use the links at the top of this page, search ‘Tuiss SmartView’
on the App Store or Google Play Store, or simply use your phone camera to scan
the QR code on the front of your blind’s swing label, to download the App.
2. When you first open the app you’ll be asked for permission for
SmartView to use your phone’s Bluetooth. Select OK to continue.
3. Fill out the short sign-in form to create a SmartView profile. Your
profile will store all of your preferences and settings.
4. Remove the holding pin from your blind’s motor and set the swing label
aside.
5. Make sure that the motor’s power switch is set to ‘ON’.
6. Select the option to add your first blind.
7. Adding a blind is as simple as scanning the QR code on the back of
your swing label (you may be asked by your phone to give permission for
SmartView to access your camera, make sure you allow it – you only have to do
this once).
8. When you add your first blind you’ll be prompted to name the room that
blind is in. Name the room, then name the blind.
9. You’ll then be prompted to set ‘limits’ for the blind – these are the
fully open and fully closed positions of the blind. It’s strongly recommended
that you set the limits at this stage rather than coming back to it later.
Step 1: check that the blind moves in the correct direction when using
the up and down arrows. If it moves the wrong way you can simply press the
‘Change direction’ button. Continue when you’re happy it’s moving correctly.
Step 2: move the blind down to where you’d like it to stop when fully
lowered.
Step 3: move the blind up to its fully open position. You can use the
‘step’ buttons to fine-tune the positioning before confirming each limit.
10. You can now use the ‘Open’ and ‘Close’ buttons to move the blind to
its top or bottom limit positions with a touch.
11. These Open and Close buttons will move all blinds assigned to the
same room simultaneously. To move individual blinds, press the ‘Select blinds’
link, then tick the box for the blind you want to move and hit ‘Next’.
12. You can then drag the blind up or down to a precise position of your
choosing. You can also select multiple blinds from the previous screen to
control in this way.
And just like that, you’re set up and ready to go!
There are other great features to take advantage of, such as creating scenes and setting timers, so explore the App’s controls to fully customise your shading.
You can also check out our full user guide here.
Batteries & Charging
To check the battery level for each blind at any time, tap the battery button from the home screen. Tap the Connect button to check all blinds in each room and the charge level of each motor’s battery will be displayed.
To charge the motor’s battery, plug the charger cable into the motor and the charger plug into a normal power outlet. The charger plug’s LED light will remain red whilst charging and turn green when the motor is fully charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>