Culturefly YNL009A Wireless speaker Instruction Manual

October 30, 2023
Culturefly

Portable Wireless Speaker
Operation Manual
Wireless Speaker YNLOOSA

YNL009A Wireless speaker

Thank you for purchasing this Mini Wireless Speaker.
Please read all instructions carefully before using and retain this manual for future use and reference.

Location of Cintrols

Getting Started

Bluetooth Pairing

  1. Power the speaker ON. A tone will be heard and the speaker will enter Bluetooth pairing mode. The LED indicator will tum solid BLUE.
  2. Set your mobile device to search for Bluetooth devices. When the list appears, select BT-SPEAKER from the found devices.
  3. After a successful pairing, a tone will be heard and you will be able to play music on the speaker.

Powering ON/OFF

  • Move the [Power] switch on the side of the speaker to power ON and OFF.
  • When powered ON, the speaker will enter Bluetooth pairing mode, and will automatically re-pair to any available previously-paired device nearby.

Adjusting Volume
In all modes, overall volume can be adjusted with the buttons on the top of the speaker. In AUX and Bluetooth modes, volume can also be controlled by your connected device.

  • Press + hold the [ +] button to increase volume.
  • Press + hold the [ -] button to decrease volume.

Adjusting Playback
In Bluetooth, FM Radio, TF and USB modes, playback can be controlled by the buttons on the top of the speaker.

  • Press the [ >] to pause playback. Press again to resume.
  • Press the [ +] button to skip to the next track/station.
  • Press the [-] button to skip to the previous track/station.

FCC Warning

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID : 2BBCN-YNLOO9A

Instruction Sheet:

THIS IS A BATTERY-OPERATED PRODUCT. THIS ISNOTATOY. INTENDED USE OF THE PRODUCT SHOULD NOT RESULT IN EXPOSURE TO THE BATTERY. In case of abuse, there is risk of rupture, fire, heat, leakage of internal components, which  could cause casualty loss. Abuses include but are not limited to: charging for a long time, short circuit, put into fire, whacked with hard object, punctured with acute object, crushed, and broken.
Harmful if swallowed. Causes skin irritation. Causes eye irritation. May cause respiratory irritation.

Proper Handling:
Do not open, disassemble, crush, or burn battery. Do not handle battery in a manner that allows terminal to short circuit. Avoid mechanical damage of the battery. Battery may explode or cause burns, if disassembled, crushed, or exposed to fire or high  temperature. Do not short or install with incorrect polarity. Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Prevent concentration in hollows and sumps.

Proper Storage:
Store in a cool, dry, well-ventilated area. Keep away from heat and direct sunlight. Keep out of the reach of children.

Disposal considerations:
Recycle in accordance with government, state and local regulations, to ensure proper disposal.
If exposed to the battery – potential health effect and first aid measures:

After eye contact:
Fishy eyes cautiously with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.

After skin contact:
Remove contaminated clothes rinse skin with plenty of water or shower for 15 minutes. Get medical aid.

After inhalation:
Remove from exposure and move to fresh air immediately. Administer artificial respiration if breathing is difficult. Seek medical attention.

After swallowing:
Rinse mouth with water. Administer at least 2 glasses of milk or water. Induce vomiting unless patient is unconscious. Get medical attention.

In case of rupture — Attention! Corrosive material.
Avoid contact with skin, eyes, and clothing. Ensure adequate ventilation. Use personal protective equipment as required. Keep people away from and upwind of spill/leak. Refer to above first aid protective measures. Handle in accordance with good industrial  hygiene and safety practice.
Stop the link if safe to do so. Contain the spilled liquid with dry sand or earth. Clean up spills immediately is safe todo so. Absorb spilled materials with an inert absorbent (dry sand or earth).
Scoop contaminated absorbent into an acceptable waste container. Collect all contaminated absorbent and dispose of according to recycling waste treatment in accordance with government, state and local regulations, to ensure proper disposal. Scrub the area  with detergent and water, collect all contaminated wash water for proper disposal
Battery may burst and release hazardous decomposition products when exposed to a fire situation.
Lithium-ion batteries contain flammable electrolyte that may vent, ignite, and product sparks when subjected to high temperature, when damaged or abused (e.g. mechanical damage or electrical overcharging), may burn rapidly with flare-burning effect, may  ignite other batteries in close proximity.

Suitable fire-extinguishing media:
Sail fire: use water spray, dry chemical, carbon dioxide, or chemical foam.
Large fire: water spray, fog, or regular foam.
Questions? Comments? Contact
contact@culturefly.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals