WB Pouch WOMBAT Keyboard User Manual
- June 11, 2024
- WB Pouch
Table of Contents
WOMBAT Keyboard
User Manual
WB Pouch User Interface
Macros
- By clicking “ Default ” , the ” W ” key will be set as the initial key value , that is, the letter ” W “
- Click on the “ macro “ , the software will convert to macro recording , as shown on the right
- Press the Red circle ” record “, the button will turn into a Gray square ” stop “, indicating that the software has now started to record the keys pressed on the keyboard
- At this point, if you press any key on the keyboard , the interface will display the key you just pressed.
- Pressing a key is composed of two actions: ” ↓ press ” and ” ↑ release ” , so you can see the result shown in the figure below.
- When you finish recording the actions on the keyboard , press the Gray square ” Stop ” to stop recording
- Then press OK at the bottom to complete the keyboard macro recording
❖ Remember ! Recorded in the software / action has not been downloaded to the keyboard , you must click ” Download ” on the right side of the interface , the software will download the recorded macro to the keyboard for execution , otherwise, once you switch to other editing functions , the recorded macro will be Macros may be lost and need to be redone!!
3. ” Multimedia ”
and ” Shortcut keys ” are some commonly used system operation hotkeys . This
software has included some commonly used operation hotkeys for selection.
4. ” Disable ” is to clear the key value. After successful setting, the key
will become no code sent.
❖ Click the desired function , press ” OK ” below , then return to the main
screen and press the ” Download ” button on the right to download it to the
keyboard to take effect
5. To call the edited macro on the keyboard , now just press Fn + the edited
key , such as Fn + “ W ” in this example.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>