Dynaflex Dyna-Flex Pro Gyro Exerciser For Injury Prevention Installation Guide
- June 11, 2024
- Dynaflex
Table of Contents
Dynaflex Dyna-Flex Pro Gyro Exerciser For Injury Prevention Installation
Guide
BASIC STARTING METHOD
Insert tip of starter cord into hole of Dynaflex Pro gyro.
Wrap the starter cord around rotor groove for one full turn.
Hold open end face up and pull starter cord quickly to activate the gyro.
To build speed, see Diagram A.
ADVAVCED STARTING METHOD
Method 1: Hold Dynaflex Pro in your dominant hand with open end face up.
With other hand, strike rotor in direction of lines on rotor 1-2times, To
build speed, see Diagram A.
Method 2: Hold Dynaflex Pro in your dominant hand with open end face up.
With the thumb of the other hand, strike rotor in direction of lines on rotor
1-2 times. To build speed, see Diagram A.
Diagram A: Building Speed: Hold Dynaflex pro firmly in your dominant hand
with open end face up between thumb and index finger. apply a rapid left to
right motion. Within seconds you will begin to feel the gyro pull. NOTE: the
faster the rotor spins the easier the gyro is to activate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>