U-BOAT CAPSOIL CHRONO DLC Quartz Watch Instruction Manual

U-BOAT CAPSOIL CHRONO DLC Quartz Watch

WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH. IN THIS BOOKLET YOU WILL FIND THE USER INSTRUCTIONS. WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE U-BOAT WATCHES OWNERS, SO TO GET ACCESS TO FURTHER BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.

WATCH FUNCTIONS

A CHRONOGRAPH START/STOP PUSHER
B CHRONOGRAPH RESET PUSHER
C SCREW CROWN
D HOUR HAND
E MINUTE HAND
F CHRONOGRAPH SECONDS HAND
G SECONDS COUNTER
H CHRONOGRAPH MINUTE COUNTER Quartz
I CHRONOGRAPH HOUR COUNTER

USER INSTRUCTIONS

POSITION 1
NEUTRAL POSITION operating position of the watch.
POSITION 3
SECOND CLICK
unscrew the crown C and pull it out to take it to position 3.
Rotate the crown C to set the desired time.

1. Push in and screw the crown C back to position 1.

Note: it is recommended to unscrew the crown C to position 3 when the watch will not be used for a long time, to limit battery consumption.

CHRONOGRAPH FUNCTIONS

Press the (on/off) pusher A to start the chronograph hand and the hours/minutes totalizer.

Press the pusher A again to stop the chronograph, which will restart by pressing it again.

After measuring the times, with the chronograph stopped, press the pusher B to reset the chronograph and totalizer hands to zero.

SPID TIME FUNCTION

1. Press the pusher A to start the chronograph.
2. Press the pusher B to stop the chronograph allowing an intermediate time to be read while timing continues. By pressing the pusher B again, the chronograph hands to “recover” the elapsed time.
3. 1 Start
   2 Time reading
   3 Restart
   4 Time reading
   5 Restart
   6 Stop

ADJUSTING CHRONOGRAPH HANDS TO CORRECT POSITION

1. Unscrew the crown C and pull it out to position 3.

2. Press the pushers A and B simultaneously for about 2 seconds.
   The counter hand F will rotate 360°.
   By pressing the pusher A , the counter hand F will return to the correct position.
   Press the pusher B to activate counter hand I correction.
   Press the pusher A to reposition the counter hand I in the correct position.
   By pressing the pusher B again we activate the correction of the counter hand H .
   Press the pusher A to reposition the counter hand H in the correct position.

3. Screw the crown C back in to position 1.

BATTERY REPLACEMENT AND OIL ADJUSTMENT

1. Innovative closure system with a compartment for quick battery change L .
2. Closing system and internal oil regulation, for the exclusive use of U-BOAT specialized technicians  M .

Note: the oily fluid inside the case may be subject to slight changes in shade due to the natural change of the liquid.

CARE AND MAINTENANCE

• Your watch will keep its performance intact for a long time, with proper care.
• We recommend that you have your watch checked every 3-4 years at one of our Authorized Dealers/Authorized Service Centers, to carry out ordinary maintenance on all mechanical parts and water resistance.
• We also recommend contacting an Authorized Dealer/Authorized Service Center to replace the strap.
• Do not leave the watch in places exposed to extreme temperature changes, humidity, the sun and strong magnetic fields.
• Make sure the watch is suitable for use in water.
• Always rinse the watch with fresh water after contact with salt water.
• It is advisable to unscrew the crown when the watch will not be used for a long time, to limit battery consumption. We recommend that you contact an authorized center to replace the battery.

OPTIMAL OPERATING CONDITIONS: 0°/+60°C.

CUSTOMER SUPPORT

U-BOAT HEAD OFFICE

Via Pescatarian 751H
Garegnano, Capannori – 55010 Lucca – Italy
Tel: +39 0583 469288 – Fax: +39 0583 462249
www.uboatwatch.com – [email protected]

References

• boatwatch.com
• U-Boat

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>