DEEPCOOL TESSERACT ATX Mid Tower User Guide

DEEPCOOL TESSERACT ATX Mid Tower

Open Case

• Unscrew the thumb screws and pull the side panel out as illustrated.

Power Supply Installation

• Put power supply on bottom of case and close to rear panel, then lock it with four 6#-32 screws with a Phillips screwdriver.

5.25 Drive Bay Installation

• Draw out the front panel from bottom of the gap when pressing top of the panel.
• Press firmly on card hook and remove the bay cover.
• Push the 5.25″ drive into the drive bay with proper force.
• Put tool-free lock into place to secure the drive.

HDD Installation

• Secure 2.5″ HDD to the rack with one 6#-32 screws, and push it into place.
• Secure 3.5″HDD to the rack and push it into place.

Motherboard Installation

• Pick out the standoffs and install them on the motherboard tray.
• Place the motherboard onto the standoffs in accordance with the I/O.
• Secure the motherboard using the M3 screws.

Compatible component size diagram

Cable management for a tidy case

• Use the cable tie and hump on the tray to tidy everything up.
• A large hole on the motherboard tray for easy installation of CPU cooler.

PCI card Installation

• Loosen the screw to remove the cover and put the PCI device in the right direction.
• Secure the PCl device by using the screws.

Compatible component size diagram

Cable Connection

Cooling fan installation capacity

Accessories and Components

• www.deepcool.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>