Original ATEYAO pro4 Wireless Bluetooth 5.1 Earphones TWS Sport Waterproof Wireless In-Ear Headphones User Guide
- June 4, 2024
- ATEYAO
Table of Contents
ATEYAO
Original ATEYAO pro4 Wireless Bluetooth 5.1 Earphones TWS Sport
Waterproof Wireless In-Ear Headphones
Specifications
- BRAND NAME: ATEYAO
- STYLE: In-ear
- VOCALISM PRINCIPLE: Dynamic
- ORIGIN: Mainland China
- COMMUNICATION: Wireless
- CERTIFICATION: CE
- NUMBER OF DRIVERS: 2
- IMPEDANCE RANGE: up to 32 Ω
- HEADPHONE PADS MATERIAL: Silicone
- MAGNET TYPE: Ferrite
- WIRELESS TYPE: Bluetooth
- PACKAGE LIST: User Manual, Charging Cable
- DRIVER DIAMETER: 10mm
- RESISTANCE: 32Ω
- SENSITIVITY: 40dB
- CONNECTORS: USB
- EARCUPS TYPE: Semi-open
- BLUETOOTH VERSION: 5.0
- TOTAL HARMONIC DISTORTION: 10%
- CHARGING METHOD: Charging case
Introduction
It has New generation DSP anti-interference 5.0 chip, no fear of any environment, high-speed transmission with Low power consumption, stable chain, no jam, enjoy good music combined with ACC+ SBC dual audio decoding. You can Achieve non inductive delay, audio and picture synchronization which is far more than ordinary. It is Bluetooth headset on the market. You can Keep track of the scene. It has Professional tuners tune headphones for thousands of times, whether you are playing games, listening to songs. Watching plays can give you excellent hearing enjoyment. It Provides more efficient wireless performance. You can Enjoy the game, gallop the battlefield. It has Graphene diaphragm, Reduce distortion and enrich details with Improve audio smoothness, reduce distortion, rich details, clear and natural voice. It has more penetrating sound quality. The 3-generation upgraded Bluetooth headset uses a lithium button battery, which has a longer battery life and lower power consumption compared with the battery commonly used in the market.
HOW TO USE
Press the “Power On” button on each speaker repeatedly until you hear the confirmation, “Power on, your speaker is ready to pair.” Any of the speakers’ “Mode” buttons should be long-pressed until you hear “Connected successfully.” The TWS mode of your speakers is currently established.
HOW TO OPERATE
- Release the multi-function key when the red and blue lights start to alternately flash for 6 seconds on each earphone (depending on your personal preference).
- To pair and connect, turn on the Bluetooth pairing feature on your phone and look for the “Air plus.”
HOW TO CHARGE
Connect the charging case to an approved wall charger or USB power source. The charging case and earbuds take around two hours to fully charge. Note: Charge times may be greater with uncertified chargers.
HOW TO RESET
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.
Frequently Asked Questions
Without a case, how do TWS earbuds get charged?
You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro USB. After that, you must wait while your earbuds fully charge.
Why doesn’t one of my TWS work?
Forgetting to turn on the switch can be the most frequent issue with this. There are, however, additional, grave causes as well: Both the charging case and the TWS earphones’ connectors should be cleaned. Examine the cable, adapter, and power outlet for damage and problems with the power supply.
Why might a single earbud malfunction?
Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.
My earbuds won’t turn on; why?
If the headphones’ power won’t turn on, the battery might not be installed properly or could need to be changed. To fix this problem, make sure you look through the following things. Important: Consult the product’s instructions if you require model-specific details to accomplish any of the tasks.
How can the volume be changed on my TWS 5.0 earbuds?
Direct volume control is offered by the TWS earphones, and it is easy to use. By holding down the left earpiece’s button, you can lower the volume. Pressing and holding the right earbud will increase the volume.
Can I charge the case and my earbuds at the same time?
Fortunately, you can charge your case and headphones simultaneously. Open the earphone charging case that was included with your headphones first. Put the buds in the case’s respective slots. Next, secure the lid.
Should I always have earbuds on hand?
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
How much time does TWS require to charge?
The earphones often require an hour to fully charge from “flat.”
The TWS button is what?
You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favourite Bluetooth music source to a primary Bluetooth speaker.
TWS earbuds are water resistant.
When you’re exercising, the headphones can withstand perspiration or rain splashes thanks to their IPX7 waterproof classification.