hysure KILOPRO Air Purifier and Humidifier User Manual
- June 9, 2024
- hysure
Table of Contents
KILOPRO
Air Purifier & Humidifier
User Manual
SAFETY INFORMATION
**** Please read this manual carefully before use and keep it for future reference. The manufacturer declines any liability for damage caused by improper use or failure to follow the instructions in this manual. Improper use or non-compliance with the instructions will void the warranty.
-
This appliance may be used by children over the age of 8 and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised or instructed in the safe operation of this appliance and understand the dangers involved. with the use of the appliance.
-
Children should not play with the appliance.
-
Cleaning and maintenance should not be performed by children without supervision.
-
Before connecting the appliance to the mains, make sure that the mains voltage corresponds to the values on the type plate of the product. Connect the appliance only to a properly grounded socket.
-
If the power cord, plug, or any other part of the product malfunctions, or if any part of the product has been dropped or otherwise damaged, repairs may only be done by a qualified electrician. Improper repairs can put users at risk of injury.
-
To reduce the risk of electric shock, do not immerse the cord, plug or body of the appliance in water or any other liquid. Do not wash the appliance in a sink or in dishwasher.
-
Always unplug the appliance when not in use and / or when cleaning.
-
The appliance is intended for domestic use only. It is not intended for commercial purposes.
-
Use the appliance only for the purpose for which it was designed.
-
Do not place the appliance on window sills, counter drip tray or on unstable surfaces.
Place it always on a stable, flat and ry surface. -
Do not place the appliance near a washbasin or sink, on appliances and equipment that are a source of heat or close to them.
-
Do not cover the air inlets or the outlet grille.
-
Do not touch the device with wet or damp hands.
-
Never use the appliance in a damp place.
-
Never use the appliance close the a source of heat.
-
Never place anything on or in the appliance.
-
Do not use the appliance near flammable objects or products (curtains, aerosols, solvents, etc.).
-
Switch off and disconnect the appliance before moving, during installation and cleaning.
-
When using, leave at least 30 cm of free space on the back and sides of the product and at least 50 cm of free space above the product.
-
Always make sure that the appliance, plug, power cable and adapter are in good condition before use. Do not pull on the power cable or appliance, even when unplugging the adapter.
OVERVIEW
SPECIFICATIONS
| Dimensions | 195 × 195 × 553 mm |
|---|---|
| Weight | 2,6 kg |
| Adapter | Input: AC 100-240 V ~ 50/60 Hz; output: 24 V 1,2 A |
| Power consumption | 23 W |
| Noise | < 55 dB |
| Coverage area | ≤ 16 m² |
| CADR | 130 m³/h |
| Steam volume | 150 ml/h |
| Humidifier volume | 1,9 l |
FILTER REPLACEMENT
Remove the filter cover before first use.
Before installing the filter, make sure that the machine is disconnected from
the power supply.
The air purifier notifies you when the number of operating hours exceeds 2200.
Then the filter needs to be replaced. A light circle around the control panel
that will flash red will alert you to replace the filter. To reset the
counter, press and hold the main power switch for at least 7 seconds.
Clean the dust off the filter regularly. The filter can be used
repeatedly after cleaning, for a maximum of the time specified by the
manufacturer.
Do not use vacuum cleaner for filter cleaning. Sterilize the filter regularly
in the sun. Use a filter specifically designed for this product.
Disconnect the device from the power supply before replacing or installing the filter.
- Turn the device upside down and turn the base of the filter in the direction of the arrow marked OPEN.
- Remove the original filter from the purifier.
- Remove the packaging from the new filter.
- Insert the new filter into the purifier.
- Put the base back in place and turn it in the direction of the arrow marked CLOSE.
USING THE DEVICE
Main switch
- Press the button to turn on the machine, one short beep will sound, the power light and the airflow speed light will come on.
- Press the button again, the machine will beep once briefly and the machine will turn off, including all the lights.
Button for setting the airflow speed.
- When in operation press the airflow speed button, the device beeps once briefly.
- Press again to set the airflow speed between automatic mode, high speed mode and night mode. The corresponding indicator will light up.
- In automatic mode, the device will regulate the speed automatically based on the air quality in the room.
- There are separate buttons for each speed mode on the remote control.
Timer setting button.
-
When in operation press the timer button to set the time interval until shutdown.
Press repeatedly to switch between 2H, 4H and 8H intervals. The corresponding indicator lights up after setting. -
When pressed again, the timer indicator will turn off and the unit will operate continuously without a timer.
-
With timer set, the machine starts counting down. When the time expires, the fan stops working and all the lights go out.
Button to turn on/off the lights.
- Press the button briefly to set lighting. The light of the device is on as a default setting. When you press the button the first time, the light intensity becomes muted. Press it again to turn the light off. When you press it the third time the light returns to the standard lighting mode.
The color of the light indicates the air quality in the room on a scale from blue to red. While blue colour indicates that the air quality in the room is good, red indicates heavy dust pollution.
Using the humidifier
The purifier package includes a humidifier which, when placed on the air
outlet grille, humidifies the cleaned air flowing from the device.
- Remove all packing materials from the water container and water curtain.
- Insert the water curtain into the water container and pour in an adequate amount of clean water. Make sure the water level is below the opening on the side of the container.
- Place the humidifier on the air outlet grille on the top of the appliance. When using the humidifier, control the unit with the remote control (however, the control panel on the unit remains functional).
CLEANING AND MAINTENANCE
- Make sure that the appliance is turned off and unplugged.
- Use a soft cloth with a neutral detergent to clean dust and dirt from the surface of the unit and the air inlet / outlet.
- After the device is completely dry, place it in a cool, well-ventilated place.
- If you do not use the device for a long time, turn it on for a few minutes once in a while to ensure good performance.
**** Make sure that the appliance is unplugged before any maintenance. Do not
immerse the appliance in water or any other liquid.
Do not use for cleaning of any part of the unit abrasive, corrosive or
flammable cleaners, like bleach or alcohol.
TROUBLESHOOTING GUIDE
| Situation | Solution |
|---|---|
| The device does not work | Is it plugged in? |
Was there a power outage?
Is the home fuse switch tripped or a fuse blown? Is the filter replacement
indicator constantly on?
Weak power| Is there an obstacle blocking the air inlet / outlet?
Is there dust on the surface of the prefilter?
Loud noise| Is there anything stuck on the fan in the air outlet?
If the device is too loud, set a lower airflow speed or set a low speed when
using in the bedroom.
Removing an unpleasant odour| When used for the first time, it is normal for
the device to emit plastic odor.
If the filter is dusty, the unit will emit an unpleasant odor, in which case
clean or replace the filter.
If the machine emits an odor as if it was burning, please disconnect the plug
from the socket and contact your distributor or customer service.
The filter replacement reminder light is still on even after the replacement.|
Press the power button for 7 seconds to reset the machine, this will start the
filter lifespan counter.
The remote control does not work| Make sure the device is turned on.
Check that there is no obstacle in the path of the infrared beam of the remote
control.
Check that the batteries are inserted correctly in the controller.
Replace the battery in the controller with a new one.
**** If the troubleshooting guide does not solve your specific problem and you need maintenance, contact your distributor or service center. Do not disassemble the device yourself during maintenance.
Manufacturer:
Guangdong Invitop Technology Co. Ltd B2F No.6 XinhuaRoad, SanjiaoTown,
Zhongshan, Guangdong, China
Importer/Importeur/Dovozce/Dovozca/Importőr:
Alza.cz, Jankovcova 1522/53, Praha 7, Czech Republic
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>