AiViD Wireless HD Transmitter and Receiver Kit User Manual
- June 8, 2024
- AiViD
Table of Contents
Wireless HD Transmitter & Receiver Kit
User manual
Connection Diagram
Receiver-RX
Hardware Casting
Wireless HDMI Receiver and Transmitter, Plug and Play
- Plug external antenna to Receiver and plug it into TV or other HDMI input devices, plug the USB C cable to a wall charger (5V/2A) or TV’s USB port.
- Switch the TV to HDMI channel, then show out the blue screen
- In the first time using, you need to choose the language by pressing the middle button of Receiver, then long-press 2-5 seconds to confirm. If you need to change language, long-press it for 10 seconds, the system will automatically restore.
- Plug Transmitter to laptop or other HDMI output devices, and plug USB cable to USB power port. Indicator light up, wait 10 seconds for auto-sync.
Some HMDI output ports can supply power to the transmitter, no need to use the USB-C power charging and work the same.
Pairing Instructions
The product has been paired out of the fact.”, Case Of Palmg fallure due. improper operation or other circumstances during use, it is necessary to restore and re pair the device as follows:
- Connect transmitter and receiver to devices
- Long press Receiver’ s behind button for 3 seconds, then the TV will show out ” Release the button to pair with Mast T,
- Long press Transmitter’ s middle button for 3 seconds, when the indicator light is off, release the button, then indicator light would flash quickly after restarting, the TV will show out Pairing-OK.
One Receiver can be matched with 8 Transmitters at the same time. Switch one
by one by pressing the middle button of the Transmitter. Please note, every
Transmitter needs to be paired well with the Receiver.
Steps to directly connect the phone to the screen
connect to Home Router Wi Fi
When using it for the first time, please give priority to connecting the
device to the home WiFi router
- Click WiFi on your phone settings page, connect your phone to MiraScreen Wi-Fi (Name is RX-Bxxxxx Default password is 12345678) .
- Turn on Phone / Pad Browser, input 192.168.203.1
- Click Internet, Choose your Home WiFi.
- Connect Input password and click Enter.
The function applies to: iPhone/iPad/Android Devices. Setup for iOS
Direct Connect for iOS
-
Connet your iPhone to your home Wi-Fi. Make sure both dongle and mobile phone are connected to the same Home wifi.
“If the dongle fails to set Step I Use iPhone / iPad’s Setting WiFi , find the Hot Spot of MiraScreen and connect it. (.-BXXXXX Password: 12345678) -
Slide Screen and go to Apple’s control center, dick. “Airplay Mirroring”,then select RX-EiXXXXXX
(Setup for Android )
Method 1 (No need to set the Stepl)
- Open the phone settings
- Find the Cast function of your phone
- Select MiraScreen as the target
The cast funtion name of different brands may be different.
HUAWEI : Setting > Smart Assist > Multi-screen Interactive
Xiaomi : Settings>Connection&Sharing>Cast (Turn on cast)
OnePlus : Settings – Bluetooth & device connection – cast
OPPO : Settings>Other wireless connections>Screencast
MEIZU : Setting-Display > Projection Screen
Lenovo : Setting Display > Wireless Display
SAMSUNG : Phone From Top To Bottom > Smart View
VIVO : Settings>Other networks and connections>Smart Mirroring>Connect to
a TV> Setting icon (Right top corner)>Screen mirroring
( For more models, please contact our customer service )
*Method 2 Use Google home to connect dongle Need to set step 1 (please confirm that your purchased product and mobile phone support Google home function)**
- Turn on the Android phone WiFi and confirm that the phone WiFi and the device are connected to the same WiFi Home network.
- Open Google Home, wait ten seconds will search the device (RX-Bxxxxx), and Click it to implement screen mirroring
(If the MiraScreen-xxxxx can not be found please refresh the homepage of Google Home. verity that the Wireless HDMI Dongle and your phone are in the same home Wi-Fi , or restarting your phone or device).
Dose and Don’ts and Troubleshooting
- If this wireless HDMI kit could not work, please check if you plug the right cable for them: External antenna for receiver (RX), USB C cable for transmitter (TX), and power both of them by plugging the USB cable into the device’s USB port.
- This wireless HDMI kit’s transmission range would become weak and slow if it passes through solid walls or metal firewalls.
- If this wireless HDMI kit could not mirror the content, please try to reset them again.
- As Window software limitations, this wireless HDMI kit could not support 4K. But if uses Receiver alone, it can mirror 4K resolution image/video to TV.
Technical support email: Support@Aimibo.tv
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This
device meets the exemption from the routine evaluation limits in section 2.5
of RSS 102 and compliance with RSS 102 F exposure, users can obtain Canadian
information on RF exposure and compliance. This equipment complies with Canada
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body. The device for operation in the band 5150-5250 MHz
is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>