HANGMAN Z-Hanger Heavy Duty Hanger Instruction Manual

Z-Hanger Heavy Duty Hanger
Instruction Manual

Z-Hanger Heavy Duty Hanger

Mach one bracket to the back of your item.![HANGMAN Z-Hanger Heavy Duty Hanger

• fig 1](https://manuals.plus/wp-content/uploads/2023/01/HANGMAN-Z-Hanger- Heavy-Duty-Hanger-fig-1.png)
  Attach the other bracket to the wall using an anchor by installing center hole first. Do not tighten completely. Adjust until level. Then mark locations of remaining anchors.
  Pivot and install remaining anchors at marked locations. Then pivot back and install remaining screws.
  Tighten all anchor screws and hang your object.
  Note: Can be adjusted loft or right without tipping.

  • Aircraft grade Aluminum
  • Alternating #6 and #8 holes every inch
  • Can be cut to smaller lengths with any carbide tip saw
  • Holds 100 lbs per foot

Scan OR for more information about this product Have a question? Give us a call.
818-610-0487 Mon-Fri I 7am-6pm PST

https://hangmanproducts.com/products/z-hanger
Find us@hangmanproducts
hangmanproducts.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>