ECARX DHU-NA-006 Multi Media Infotainment System User Guide
- September 11, 2024
- ECARX
Table of Contents
ECARX DHU-NA-006 Multi Media Infotainment System
Product Specifications
Overview
This document describes the product specifications of ECARX DHU-NA-006 (DHU), specifically designed for Volvo vehicles. It covers all the basic functions that DHU-NA-006 needs to implement.
Terms and Abbreviations
- ACC OFF: ACC hardwire signal is low. (Crank,ACC hardwire signal is also low.)
- ACC ON
- AC
- AM. (and other abbreviations as listed in the manual)
Product Definition
System Block
Details about the system block are not provided in this excerpt.
Architecture Design
No specific information is provided in this section in the text extract.
Electrical Characteristics
Temperature and Humidity Requirements:
No specific details regarding temperature and humidity requirements are
provided in the text extract.
Product Operating Voltage and Power
Consumption
- Product Operating Voltage: 9-14V
- Static Power Consumption: 0.2 mA
- Normal Power Consumption: [Value not provided]
FAQ
Q: What should I do if I encounter water damage to the DHU?
A: In case of water damage, immediately disconnect the DHU from power and
avoid attempting to power it on. Dry the device thoroughly before attempting
to use it again. Contact customer support for further assistance.
Product Specifications
<All the above information is owned by ECARX (Hubei) Technology Co., Ltd. ,
and shall not be disclosed.>
Revision History
Date | Version No. | Revisor | Description |
---|---|---|---|
Overview
Purpose
This document describes the product specifications of ECARX DHU-NA-006
(hereinafter referred to as DHU).
This document covers the complete set of all the basic functions that DHU-
NA-006 needs to implement.
Scope of Application
It is an in-vehicle product that is only applicable to Volvo vehicles
Terms and Abbreviations
Abbreviation | English original |
---|---|
ACC OFF | ACC hardwire signal is low. (Crank, ACC hardwire signal is also low.) |
ACC ON | ACC hardwire signal is high. |
AC | Air Conditioning |
AM | Amplitude Modulation |
AMP | Amplifier |
APA | Assit |
AVM | All View Monitor |
BSD | Blind spot vehicle Discern System |
BLE | Bluetooth Low Energy |
BT | Bluetooth |
CAN | Controller Area Network |
CVBS | Composite Video Broadcast Signal |
DLNA | DIGITAL LIVING NETWORK ALLIANCE |
DVR | Digital Video Recorder |
ENT | Entertainment |
FM | frequency modulation |
GPS | Global Position System |
HMI | Human Machine Interface |
HUD | Head Up Display |
IHU | Infotainment Head Unit |
IME | Input Method Editor |
IPK | Instrument Pack |
LIN | Local Interconnect Network |
LVDS | Low Voltage Differential Signal |
MCU | Microcontroller Unit |
MIC | Microphone |
MMI | Multi-Media Infotainment |
PPM | Play Position Memory |
RSE | Rear Seat Entertainment |
Abbreviation | English original |
--- | --- |
RVC | Rear View Camera |
CPU | Central Processing Unit |
SVC | Surround View Camera |
SWC | Steering Wheel Control |
TCP | Transmission Control Protocol |
TTS | Text To Speech |
USB | Universal Serial Bus |
VR | Voice Recognition |
T-BOX | Telematics Box |
RRS | Reverse Radar System |
PAC | Parking Assist Control |
PEPS | Passive Entry/Passive Start |
BCM | Body Control Module |
E-CALL | Emergency Call |
B-CALL | Breakdown Call |
Product Definition
The in-vehicle multi-media infotainment system is mainly composed of DHU,
central control display, radio antenna, Bluetooth antenna, speakers (bass,
mid-range, treble, subwoofer, etc.), external power amplifier, microphone.
There are switch keys and interfaces related to the system on the steering
wheel.
DHU mainly allows you to access radio, USB audio and video playback, clock
display, Bluetooth phone connection, GPS navigation, information display,
vehicle settings, voice control function requirements, reversing video/dynamic
Park Assist/panoramic video/reversing radar icon display, DVR video display
and controls, air conditioning information display and settings, and other
functions.
System Block
Architecture Design
Interface Definition Description
Product Size
Size: 197.1mm196.8mm103.6mm (including bracket); Weight: 1236 ± 50g
Installation Requirements
- Keep the BT/WIFI antenna side at least 50 mm away from the metal parts of the body.
- Keep an operating space of at least 50 mm on the connector side to facilitate the bending of the wire harness.
- Keep at least 35 mm of natural convection space on both sides of the host to ensure enough space for heat dissipation. If the requirements cannot be met, be sure to use a convection vent.
- To ensure the effect of the cooling fins, make sure that the intersecting angle between the Z’ axis of the host and the Z axis of the car remains square, no more than ±90°.
- It is recommended to keep the host away from the air conditioning duct, as the size of the cooling hole is 2.6mm and has three side openings. There is no way to guarantee it will not be damaged by water.
- This device should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Electrical Characteristics
Temperature and humidity requirements
- Temperature range:
- Operating temperature: -40°C ~ 85°C
- Storage temperature: -40°C ~ 85°C
- Low temperature storage: 24 hours at -40°C
- High temperature storage: 504 hours at 85°C
- Relative humidity: 5% ~ 80%
Product Operating Voltage and Power Consumption
Product operating voltage | Static power consumption | Normal power consumption |
---|---|---|
9-14V | ≤0.2 mA | <5 A |
RF
Bluetooth Module
Equipped with Bluetooth v4.2, compatible with 1.X, 2.X+EDR, BT 3.X. BT4.0 and
BT4.1, with an operating frequency bandwidth of 2.4G. Supporting GFSK
π/4-DQPSK and 8-DPSK in modulation mode. See the figure below for the <All
the above information is owned by ECARX (Hubei) Technology Co., Ltd. , and
shall not be disclosed.> parameters (The test data is the actual test value):
Bluetooth (2402–2480 MHz): 9.05 dBm
Bluetooth Low Energy (2402–2480 MHz): 5.06 dBm
WIFI Module
Dual frequency; 2.4G and 5G; frequency bandwidth: 2400–2483.5 MHz; 5725-5850
MHz. Allowing 802.11a/b/g/n/ac protocol; supporting
CCK/OFDM/BPSK/QPSK/64QAM/QPSK in modulation mode. See the table below for
details: (The test data is the actual test value) WLAN RF
Characteristics
Wi-Fi 2.4 GHz (2412–2472 MHz): 19.83 dBm
Wi-Fi 5 GHz (5745–5825 MHz): 13.93 dBm
Statement
FCC
FCC Statement
Caution: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information:
The radiated output power of this device meets the limits of FCC/ISED radio
frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm between the equipment and a person’s body.
ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference thatmay cause undesired operation of the device.
This equipment complies with Industry Canada radiation exposure limits set
forth for an uncontrolled environment.
The radiated output power of this device meets the limits of FCC/ISED radio
frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm between the equipment and a person’s body.
<All the above information is owned by ECARX (Hubei) Technology Co., Ltd. , and shall not be disclosed.>
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>