realink PoE IP Camera User Guide
- June 7, 2024
- realink
Table of Contents
PoE IP Camera
Quick Start Guide
QG4_A
Technical Support
For Windows Client & Mac Client, please download the PC software:
https://reolink.com/software-and-manual/
For advanced setup, please download the user manual: https://reolink.com
/software-and-manual/
For more troubleshooting, please go to FAQs on our website:
https://reolink.com/faqs/
For other technical support, please contact us at
support@reolink.com
Welcome to Reolink Easy Setup Within Minutes!
Access the Camera by Smartphones
Camera Connection Diagram
For initial setup, please connect the camera to your router LAN port with an Ethernet cable, and then follow the steps below to set up your camera. Make sure that your camera and your smart devices are in the same network.
Install Reolink App
There are two ways to get the Reolink App:
- Search “Reolink” in App Store (for iOS), or Google Play (for Android), download and install the app.
- Scan the QR code below to download and install the app.
https://play.google.com/store/apps/details?id=com.mcu.reolink https://itunes.apple.com/us/app/reolink/id995927563?ls=1&mt=8
Add the Device
-
When in LAN (Local Area Network)
The camera will be automatically added. -
When in WAN (Wide Area Network)
You need to add the camera either by scanning the QR code on the camera or by entering the UID number manually.
In LAN
- Connect your smartphone to the WiFi network of your router.
- Launch Reolink App. The camera will automatically display in the camera list in LAN.
- Tap the screen to sync the time and create your password.
- Start live view or go to “Device Settings” for more configurations.
In WAN
- click ’+‘ on the upright corner.
- Scan the QR code on the camera, and then tap “Login”. (There is no password at the factory default status.)
- Name your camera, create a password, and then start live view.
This icon only displays if the camera supports 2-way audio.
This icon only displays if the camera supports pan & tilt (zoom).
Access the Camera by Computer
Install Reolink Client
Please install the client software from the recourse CD or download it from
our official website: https://reolink.com/software-and-
manual.
Start Live View
Launch the Reolink Client software on the PC. By default, the client software
will automatically search the cameras in your LAN network and display them in
the “Device List” on the right-side menu.
Click the “Start” button, and you can view the live streaming now.
Add the Device
Alternatively, you can manually add the camera to the client.
Please follow the steps below.
-
Click “Add Device” on the right-side menu.
-
Click “Scan Device in LAN”.
-
Double click on the camera you want to add. The information will be filled in automatically.
-
Input the password for the camera. The default password is blank. If you have created
the password on Reolink App, you need to use the password to log in. -
Click “OK” to log in.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>