Esonic BR-25 Mobile Recorder User Manual

: June 6, 2024
: ESONIC

Table of Contents

Charging before use
Turning on the power
Name of each part
Specification
Cautions
FCC notice to users and product statements
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual
MODEL No. : BR-25C

Charging before use

Please charge by using a USB or DC adaptor(optional).

Charging: The motion LED alternates between a green light and a red light.
Charging complete: Motion LED turns off.

Check! The remaining battery can be checked by pressing and holding the VOL+,- key while waiting for playback or recording.

Battery remains	Operation
Enough : 70 ~ 100%	Green LED is turned on for 5 seconds
Usual : 30 ~ 70 %	Green LED blinks for 5 seconds
Short: less than 30%	No indication

Turning on the power

Connecting to Bluetooth device(pairing)
A. For pairing, mobile device starts Bluetooth search.
B. Move the mode switch to Bluetooth.
C. Press the Talk/Power button until the blue LED flashes rapidly. (5 seconds)
D. Select BR-25 which mobile device has searched. Function| Operation
---|---
Power On/Off| Until blue LED is turned on/of, press the button of talk/power for 1
second.
Answering/ending call| Press the button of talk/power.
Rejecting talk| Press the button of talk/power two times rapidly.
Adjusting volume| Press the button of volume + or – on the side during call or playback.
Recording call A. Pair with a mobile device by pressing the button of talk/power. (refer to “Connecting to Bluetooth device”)
B. Move the mode switch to Bluetooth.
C. When you receive a call or make a call, the recording starts automatically, and the recording ends when a call is finished.
D. Motion LED is turned on in red during recording.

Caution! In case the talking time is less than 10 seconds, the recording might not start.

General recording A. Move mode switch to record.
B. To turn on the power, press and hold the Talk/Power button until it vibrates.
C. After showing the current battery remains, the Motion LED lights up red, and the recording starts.
D. Press and hold the Talk/Power button to end recording and turn off the power.
Playing back A. Move mode switch to VOICE playback (⊙)
B. To turn on the power, press and hold the Talk/Power button until it vibrates.
C. Press the PLAY/STOP(▶/■) button.
D. Play the recorded file if it exists..
E. During playback, it is possible to move files by pressing the button of the previous file(◁◁) or next
file(▷▷).
F. Press the PLAY/STOP(▶/■) button again to stop.
Connecting to a PC A. Remove the product’s L-channel (left) earphone and connect the USB cable to the terminal.
B. Connect the opposite cable to your PC.
C. Connect to your PC as a removable disk.
D. Removable disk - >VOICE folder contains recorded files and can be played and deleted.
Caution! Deleted files can not be recovered. Delete the files after checking them carefully.

Name of each part

Specification

| Model No.| BR-25
---|---|---
| Bluetooth version| V 4.0
| Supported profiles| HFP, HSP, A2DP
| Usage Distance| Max. 10m
| Range of frequency| 2402-2480 MHz
| Recording a call/Standby time| about 10 hours / about 25 days
| General recording time| XHQ about 25 hours / HQ about 30 hours
| Charging time| about 2.5 hours
| Rechargeable Battery| 230mAh Lithium Polymer

Cautions

In case there are no battery remains, recording is not possible. Please use it after charging all the time.
If you remove it from PC in using, contents could be lost, and please be sure to use the USB safety
Please undergo a backup for the files saved in internal memory all the time.

FCC notice to users and product statements

Caution: Any changes or modifications in the construction of this device that are not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, any cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

European CE notice to users and product statements

Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

A/S TEL: 070-4015-7114~6
Address: 2fl., 10-19, 166 beings, LS-ro, Gunpo-si, Gyeonggi-do, Korea 15807
Homepage: http://www.esonic.co.kr