GoXteam GX Baby Lounger Baby Nest Instruction Manual
- October 27, 2023
- GoXteam
Table of Contents
GoXteam GX Baby Lounger Baby Nest
HOW TO ASSEMBLE
- Step l. Take out the bumper, mattress, and cover
- Step 2. Put one end of the bumper into the bedcover
- Step 3. Install the middle part and the other end of the bumper into the bed cover
- Step 4. Pull up the zipper of the bumper
- Step 5. stuffed mattress
- Step 6. Pull up the mattress zipper
- Step 7. Knot the tail strap of the nest
- Step 8. Tighten the bow tie
- Step 9. Installation is complete
SUITABLE FROM OTO FOR APPROXIMATELY 12 MONTHS
CARE
Wash with similar colors
OUTER COVER
Machine wash warm inside a garment bag and hang to line dry(to help avoid color bleeding for covers with prints, be sure to immediately hang to dry after the machine cycle is finished and ensure there are no folds or overlapping when drying), do not tumble dry, warm iron, do not bleach, do not dry clean.
PAD
Hand wash and lay flat to dry, do not tumble dry, do not iron, do not bleach, do not dry clean.
INNER SLEEVE
Machine wash warm and hang to line dry, do not tumble dry, warm iron, do not bleach, do not dry clean.
INNER TUBE
The tube rarely needs washing, shaking and ventilating are usually enough. If washing the tube, machine wash hot inside a garment bag then tumble dry on low. You can shake or fluff to redistribute the filling if necessary. If still damp, lay flat to dry. Do not iron, do not bleach, do not dry clean.
USE
SAFETY INSTRUCTIONS
- GoXteam must always be used in a childsafe and supervised environment.
- The child’s head must be kept up when using GoXteam.
- Always ensure that GoXteam is absolutely lying flat on a firm and stable surface during use.
- Do not use GoXteam on an elevated surface.
- Do not carry a child in GoXteam. Always ensure the child is removed from GoXteam before transporting the dock.
- Always place the infant on their back to sleep and rest.
- Tummy time must be strictly supervised.
- Keep pillows and other soft objects, such as stuffed toys and blankets, out of the infant’s sleeping/resting environment.
- GoXteam does not harbor heat but will adapt to the temperature of its surroundings. Dress the child according to the room temperature.
- Check GoXteam regularly for damage. Do not use if damaged.
- Only use GoXteam when fully assembled. Never use component parts outside of fully assembled GoXteam.
Manufacturer| Ningbo TreeNest Children Products Co., ltd
---|---
Address| No.19, Kesan Road, Taoyuan Street, Ninghai, Ningbo, Zhejiang
Contact| Email: goxteam@loutlook.com
SPECIFICATION
Product Size: 944812cm(3718.94.8inch)
Package Size: 3626llcm(l4.210.34.3inch)
Weight: l.6Kg(3.51b)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>