Innovative Aftermarket Group AC61 Wireless Camera Instructions

AC61
Wireless Camera BLE

AC61 is a lower power consumption BLE camera device, which can operate with an internal rechargeable battery. AC61 can be installed anywhere and anytime for keeping your valuables safe. The motion (PIR) sensor is used to detect unauthorized persons and the camera would capture the image of the site. The Siren and Warning lights can be used to warn and alert people on-site or close by. The flashlight lit up the site for better visibility.

IT’S RELIABLE
The AC61 is a high-performance, IP45 rated device. It includes an integrated BLE5.0 and a 200Mpix camera, it can communicate with the BLE5.0 device.

IT’S SIMPLE
With rechargeable batteries, the AC61 is easy to install on cars, trucks, trailers, warehouses, shops, homes/motor-homes, construction sites, storage, valuable equipment, toolboxes, and more. AC61 can be waked up by the message coming from BLE 5.0 host device.

IT’S FUNCTIONAL
The AC61 is a simple BLE camera when the BLE host device gets any event that needs to capture the picture, it can trigger the B LE camera via BLE and then the BLE camera will wake and capture pictures send to the BLE host immediately.

• BLE 5.0 for lower power consumption
• 2 LEDs status indicators for work st atusandBLE status.
• Camera for imagine capturing
• Light sensor for the camera
• Infrared LEDs for the camera working in a dark environment
• Flashlight to light up the site
• IP45sealed,
• At least 3years of operation on battery back-up, 4 pictures captured per day.
• Configurable input for events to trigger picture capture

Specifications:

BLUETOOTH

• BLE 5.0 lower power consumption

BATTERY INFORMATION

• Type: Non-rechargeable battery
• Capacity: 3000mAh @ 3.0V

ENVIRONMENTAL

• IP45 Rating
• Operation Temperature: -30°C to +60°C
• Storage Temperature: -40°C to +85°C

PHYSICAL

• Dimensions: 57.28 x 45.92x 22mm
• Weight: —100g
• Internal BLE Antenna

Electrical

• On-battery3000mAhO 3.0V
  ✓ Sleep/Hibernate: <20uA
  ✓ Capture picture and Reporting: 30-100mA Typ ical

Peripherals & Sensors

• Camera : 2MPixels
• Flashlight : 100 LUM

APPROVALS

• FCC
• PTCRB & Carrier Approved

Installation & operation:

Step 1: Power on the machine Install the battery, lock the screw, and the machine will start Power on.

Step 2: Connect the main control device inputs the Bluetooth ID of the machine and automatically connects the machine through Bluetooth. After connecting the machine, the main control device can control the machine, and the machine can also transmit data to the main control device.

Step 3: Fixed machine Tear off the protective film on the base of the machine, paste the machine in a suitable position i n the car, press the machine and fix it. Or, fix the machine on the bracket through the bottom s crew hole.

Step 4: Adjust the camera angle of view
Rotate the rotating shaft to adjust the horizontal angle of the camera; Rotate the upper shell up and down to adjust the elevation angle of the camera.

FCC Regulations:

• This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  —Reorient or relocate the receiving antenna.
  —Increase the separation between the equipment and receiver.
  —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  —Consult the dealer or an experienced radio/ TV technician for help.

• Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.  The tennis used for the transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>