Garstor Lq228 Fabric Shaver User Manual
- June 14, 2024
- Garstor
Table of Contents
Fabric Shaver
User Manual
Model ：Lq228
Lq228 Fabric Shaver
Garstor Fabric Shaver
- Switch ON/OFF
- Lint Collector
- Viewable window
- Charging indicator
- Outer Knife Net
- Round blade
- USB Cable
- Cleaning brush
- User’s manual
Charging Instructions
Please turn off the switch while charging.
This model does not support using it while charging.
- Direct plug to laptop/desktop, power-bank, car charger, charger adapter(5V/1A).
- The light turns on, which means it’s charging.
- It can be fully charged after continuous charging for about 8 hours.
Note: After fully charged, the charging indicator light will not change color or go out.
Using Point ：
- When using the Fabric Shaver to trim thin garments, first fold the garments in double layers and place them on the ironing board to trim the pills.
- If the cloth has a weave pattern, trim it by sliding it in the direction of the pattern.
- When using the Fabric Shaver, please pay attention to bypass the following parts.
a. Around the buckle and zipper
b. Foreign matter sticking to clothing
c. Thin or flaky areas
d. Thread connection
Clean the Fabric Shaver
- Remover fabric lints from the collector.
- Clean the remaining lints via a cleaning brush.
- Open the stainless steel cover.
- Clean the lint inside the blade and cover via cleaning brush.
**** Please do not touch the blade with your hands to avoid injury.
| Frequently Question | Possible Reason | Solution |
|---|---|---|
| The lightis not working | The switch is not turned off when charging | |
| The light is damaged circuit failure | Please turn off the switch |
Contact to seller for a replacement
Contact to seller for a replacement
Does not work after Turn on the| The battery dead circuit failure| .Connect to
the power supply to charge
Contact to seller for a replacement
Unable to Charge| The switch is not turned off when charging
USB cable was damaged circuit failure| Please turn off the switch
Please use another usb cable to charge
Contact to seller for a replacement
Can not remove lint| Excessive buildup attached to the blade are
The blade is damaged or worn| Please clean the lint in the guard andblade
Contact to seller for a replacement
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>