DIYCO D1.2 Digital Tire Pressure Gauge User Manual
- June 9, 2024
- DIYCO
Table of Contents
DIGITAL TIRE PRESSURE GAUGE
MODELS: D0, D1.2 (MK2)
USER MANUAL
D1.2 Digital Tire Pressure Gauge
Visit our site: diycopro.com
(Scan this QR code with phone)
http://www.diycopro.com
Email: support@diycopro.com
NEED HELP? PLEASE CONTACT US FIRST, BEFORE RETURNING TO AMAZON.
https://www.diycopro.com/pages/contact-us
support@diycopro.com
(scan QR code for support)
WARRANTY
1-YEAR standard warranty Included
GET FREE LIFETIME WARRANTY WHEN YOU REGISTER YOUR PRODUCT.
Scan QR Code to Product
Registration page
https://www.diycopro.com/pages/contact-us
INSTRUCTIONS
Model (MK2) D1.2 features digital hold which differs from model D1. Press
ON/OFF button to reset gauge back to zero before taking measurement.
STEPS
- Consult your vehicle’s manual for correct tire pressure. Check pressure when tires are cool.
- Push “On” button gauge comes on with lighted display. This gauge reads in four different units: PSI, BAR & KPA, KGF/CM2 and should display “0” when on standby in any of these units.
- To select a different unit, press “UNIT” button and see bottom side of display until desired unit has been selected.
- Press air chuck firmly onto tire stem ensuring no air leakage. The exact air pressure value of your tire will be displayed.
- To check the next tire. Press the ON/OFF button to reset the gauge to display “0.0”and REPEAT steps 4.
- The display will remain ON for proximately 90 seconds and automatically switch OFF.
- NO LIGHT? Should the light go off, press “UNIT” to turn light back on.
- If pressure reading seems unusually low, repeat above steps, ensuring that no air escapes between gauge chuck and tire valve stem.
BATTERY MAINTENANCE
To replace the battery, remove cover located on back of gauge. Insert new battery, making sure the (+) face the correct direction.
ILLUSTRATION
*** when pressure reading is present, press once to reset then again to
turn off.
Scan QR code to access digital instruction manual**
https://www.diycopro.com/pages/user-manual-digital-tire-pressure
SPECIFICATIONS
SERVICE: Compatible gases
ACCURACY: +/- .5% FS, Grade A, ANSI/ASME B40.7
RESOLUTION: 0.1 PSI
PRESSURE RANGE: 0 to 200 PSI (0.21 to 13.78 Bar)
TEMPERATURE LIMITS: 0 to 100 degree F (17.8 to 37.8 C)
CONNECTION: Tire valve stem or equivalent
DISPLAY: 3-1/2 digit, 3/8- LCD with backlight
SCREEN SIZE: 1.50” measured diagonally
SHUTOFF: 90 second
POWER REQUIREMENTS: (2) AAA battery, installed functional, user
replaceable.
WEIGHT: Hose style: 8oz (230g)
Distributed by PHILAN CO L.L.C
www.diycopro.com
Design in Lakeville, MN – Made in China
Manual 2.25.22
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>