innoway Bradford Bluetooth Headphones Instruction Manual

**Bradford Bluetooth Headphones
Instruction Manual

**

OVERVIEW

4.3.5mm AUX Port

SPECIFICATION

Bluetooth specifications: Bluetooth® version 5.0
Support profile: A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP, SMP, GAP, GATT, RFCOMM, SDP, 12CAP PROFILE Transmission distance: up to 10m (This may vary based on environmental factors or the type of Bluetooth® device being used)
Built-in battery: 500 mAh Lithium Battery
USB Recharge voltage: 3.7V
Frequency Response: 20hz-20Khz
Sensitivity: 100dB ± 3
Product dimensions: 165.3x83x189.3mm Playback time: 30 hours
Charging time: 3 hours

PACKING LIST

• Bluetooth ® Headphones
• USB Charging Cable
• 5mm AUX cable
• Travel Case
• User Manual

BLUETOOTH® OPERATION

1. Please ensure that the Bluetooth function has been turned on in the settings of your Bluetooth enabled device.

2. Turn the headphones on by pressing the power/multi-function button until the LED indicator light begins to flash.
   The LED indicator light will flash to detect Bluetooth-enabled devices near you and will enter pairing mode.

3. “GEMLINE HP” will appear on the Bluetooth device list, select “GEMLINE HP” to establish pairing.

4. When you want to play audio from another Bluetooth device, disconnect the headphones from the original device and follow steps 1-3 to re-pair the headphones with a new Bluetooth-enabled device.

BUTTON CONTROL

• Power On/Off: Press and hold the power/multi-function button for approximately 4 seconds.
• Play/Pause: Press the power/multi-function button once to Play/Pause.
• Volume Up/Previous Track: Press + button once to increase volume, press and hold for the next track.
• Volume Down/Next Track: Press – the button once to decrease volume, press and hold for the previous track.
• Hands-free Phone Use: Press the power/multi-function button once to answer an incoming call. While on a call, press the power/multi-function button once to end the call.
• Reject a call: Press the power/multi-function button twice to reject an incoming phone call.
• Redial the last number. Press the power/multi-function button twice.

AUX PLAYBACK OPERATION

1. Connect the headphones to a smartphone, audio device, or laptop with the 3.5mm AUX cable (included).
2. The next/previous song button can only be adjusted on the device that is connected through the 3.5mm AUX cable.

CHARGING THE HEADPHONES

1. When the battery is low, please charge via the included USB Charging time is approximately 3 hours and provides up to 30 hours of continuous operation.
2. The LED indicator light will be red during charging and will turn off once it is fully charged. When the battery is low, the LED indicator light will flash red.

WARNING

1. Do not disassemble, repair, or modify the headphones.
2. Do not place the product in or near the fire to avoid danger, as it uses a lithium battery.
3. Avoid storage at extreme temperatures, this can shorten the battery life and may affect the headphones.
4. Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
5. Avoid dropping the headphones as they may cause damage to the product.

KIND REMINDER

1. To prolong the headphone’s life span and to avoid hearing damage, please do not listen to music in high volume for long periods of time.
2. When an error occurs with the headphones, please turn off the headphones and restart it to troubleshoot.
3. When the headphone power is low, the Bluetooth range may be affected. Please charge the headphones to avoid disruptions during use.

PROBLEM|

TROUBLESHOOTING METHOD

---|---
Unable to pair the headphones with a  mobile device

| 1. Inspect whether the headphones are searching for a Bluetooth-enabled device to connect to. If not, restart the headphones.
2. Difficulty in searching and connecting to the desired device can be affected if multiple devices are equipped,  turned on, and in range for Bluetooth connectivity. Please turn off or disable the Bluetooth function on the other devices.
3. The power of the battery is insufficient, please recharge the headphones.
The music stops from time to time| 1. Inspect the distance between the headphones and the Bluetooth-enabled device, it may exceed the Bluetooth transmission range.
2. Inspect if there is an obstacle between the headphones and the Bluetooth- enabled device.
3. The power of the battery is insufficient, please recharge the headphones.
The sound is low or distorted| 1. Inspect the volume of the connected headphones or Bluetooth-enabled device and adjust the volume as needed.
2. The power of the battery is insufficient, please recharge the headphones.
The Bluetooth indicator light remains OFF| 1. The power of the battery is insufficient, please recharge the headphones.
2. Restart the headphones.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by The Gem Group is under license. Other trademarks and trade names are those of their respective owners.

PMN: Bradford Bluetooth Headphones

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.
Portable
RF Exposure Statement
The device has been evaluated to meet general RF exposure requirements. This

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used with a minimum distance 0mm between the radiator and your body.

IC ID：21530-101128
FCC ID：2AGR4-101128

Documents / Resources

| innoway Bradford Bluetooth Headphones [pdf] Instruction Manual
101128, 2AGR4-101128, 2AGR4101128, Bradford Bluetooth Headphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>